Archive | Advertise | March 2020

Print Print this article | Send to Colleague

Listed below are TAPPI Standards that have recently gone out for ballot to the corresponding Standard-Specific Interest Group (SSIG). The date in parentheses is the closing date for voting.

T 261 cm-10 Fines fraction by weight of paper stock by wet screening (March 27, 2020)
T 277 sp-14
Macro stickies content in pulp: the “pick-up” (March 23, 2020)
T 401 om-15
Fiber analysis of paper and paperboard (March 21, 2020)
T 409 sp-15
Machine direction of paper and paperboard (March 20, 2020)
T 480 om-15
Specular gloss of paper and paperboard at 75 degrees (March 23, 2020)
T 534 om-15
Brightness of clay and other mineral pigments (d/0 diffuse) (March 27, 2020)
T 546 om-15
Machine-direction grammage variation measurement (gravimetric method) (March 21, 2020)
T 553 om-15
Alkalinity of paper as calcium carbonate (alkaline reserve of paper) (March 26, 2020)
T 555 om-15
Roughness of paper and paperboard (print-surf method) (March 28, 2020)
T 558 om-15
Surface wettability and absorbency of sheeted materials using an automated contact angle tester (March 28, 2020)
T 567 om-15
Determination of effective residual ink concentration (ERIC) by infrared reflectance measurement (March 29, 2020)
T 656 cm-07
Measuring, sampling, and analyzing white waters (April 19, 2020)
T 684 om-15
Gross heating value of black liquor (March 26, 2020)
T 803 cm-10
Puncture test of containerboard (March 29, 2020)
T 826 om-13
Short span compressive strength of containerboard (April 18, 2020)
T 836 om-13
Bending stiffness, four point method (April 26, 2020)
T 1007 sp-15
Sample location for fiber glass mat sheets (March 20, 2020)
T 1012 om-15
Moisture content of fiber glass mats (March 20, 2020)
T 1015 sp-15
Fiber glass mat uniformity (visual defects) (March 21, 2020)

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.


TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 |
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)