Listed below are TAPPI Standards that have recently gone out for ballot to the corresponding Standard-Specific Interest Group (SSIG). The date in parentheses is the closing date for voting.

T 261 cm-10 Fines fraction by weight of paper stock by wet screening (March 27, 2020)
T 277 sp-14 Macro stickies content in pulp: the “pick-up” (March 23, 2020)
T 401 om-15 Fiber analysis of paper and paperboard (March 21, 2020)
T 409 sp-15 Machine direction of paper and paperboard (March 20, 2020)
T 480 om-15 Specular gloss of paper and paperboard at 75 degrees (March 23, 2020)
T 534 om-15 Brightness of clay and other mineral pigments (d/0 diffuse) (March 27, 2020)
T 546 om-15 Machine-direction grammage variation measurement (gravimetric method) (March 21, 2020)
T 553 om-15 Alkalinity of paper as calcium carbonate (alkaline reserve of paper) (March 26, 2020)
T 555 om-15 Roughness of paper and paperboard (print-surf method) (March 28, 2020)
T 558 om-15 Surface wettability and absorbency of sheeted materials using an automated contact angle tester (March 28, 2020)
T 567 om-15 Determination of effective residual ink concentration (ERIC) by infrared reflectance measurement (March 29, 2020)
T 656 cm-07 Measuring, sampling, and analyzing white waters (April 19, 2020)
T 684 om-15 Gross heating value of black liquor (March 26, 2020)
T 803 cm-10 Puncture test of containerboard (March 29, 2020)
T 826 om-13 Short span compressive strength of containerboard (April 18, 2020)
T 836 om-13 Bending stiffness, four point method (April 26, 2020)
T 1007 sp-15 Sample location for fiber glass mat sheets (March 20, 2020)
T 1012 om-15 Moisture content of fiber glass mats (March 20, 2020)
T 1015 sp-15 Fiber glass mat uniformity (visual defects) (March 21, 2020)