Print this article | Send to Colleague

Volunteers for the following working groups of Technical Information Papers (TIPs) may be needed.

All Working Groups of TIPs require a minimum of 3 TAPPI members from 3 different companies in order to review a TIP.

TIP 0301-01 Corrugated boxplant - list of potential hazards (formerly TIP 0304-55) WGC: Tom Allen (need 2 or more members)

TIP 0305-35 Rotary diecutter urethane anvil maintenance WGC: Glenn Rogers (need 1 or more members)

TIP 0305-49 Checklist: preparing diecuts for shipment WGC: Glenn Rogers (need 1 or more members)

TIP 0306-06 Drying and curing techniques for in-line flexographic printing WGC: Thomas Staal (need 2 or more members)

TIP 0306-17 Overview of the selection process for a laser engraved ceramic anilox roll WGC: Steve Woodard (need 1 or more members)

TIP 0306-09 Ink metering systems for corrugated flexo presses WGC: Peter A. Snyder (need 1 or more members)

TIP 0304-30 Calibration and maintenance of the manually operated micrometer WGC: Steve Schmidt (need 1 or more members)

TIP 0305-42 Folding section WGC: John Buzzell (need 2 or more members)

TIP 0305-45 Squaring flap cut (center special) boxes WGC: John Buzzell (need 2 or more members)

TIP 0416-14 Water quality guidelines and monitoring requirements for paper mill boilers operating with softened makeup water WGC: Jim Graham (need 2 or more members)

 If you would like to join a Working Group of a TIP, please write to tip@tappi.org for more information.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)