Volunteers for the following working groups of Technical Information Papers (TIPs) may be needed.

All Working Groups of TIPs require a minimum of 3 TAPPI members from 3 different companies in order to review a TIP.

TIP 0301-01 Corrugated boxplant - list of potential hazards (formerly TIP 0304-55) WGC: Tom Allen (need 2 or more members)

TIP 0305-35 Rotary diecutter urethane anvil maintenance WGC: Glenn Rogers (need 1 or more members)

TIP 0305-49 Checklist: preparing diecuts for shipment WGC: Glenn Rogers (need 1 or more members)

TIP 0306-06 Drying and curing techniques for in-line flexographic printing WGC: Thomas Staal (need 2 or more members)

TIP 0306-17 Overview of the selection process for a laser engraved ceramic anilox roll WGC: Steve Woodard (need 1 or more members)

TIP 0306-09 Ink metering systems for corrugated flexo presses WGC: Peter A. Snyder (need 1 or more members)

TIP 0304-30 Calibration and maintenance of the manually operated micrometer WGC: Steve Schmidt (need 1 or more members)

TIP 0305-42 Folding section WGC: John Buzzell (need 2 or more members)

TIP 0305-45 Squaring flap cut (center special) boxes WGC: John Buzzell (need 2 or more members)

TIP 0416-14 Water quality guidelines and monitoring requirements for paper mill boilers operating with softened makeup water WGC: Jim Graham (need 2 or more members)

 If you would like to join a Working Group of a TIP, please write to tip@tappi.org for more information.