Translation is provided as a courtesy and TAPPI cannot verify its accuracy
Voith Paper
TAPPI Over The Wire Paper 360
Past Issues | Subscribe | Printer Friendly | TAPPI.org | Advertise | Buyers Guide | Travels with Larry Archive FacebookTwitterLinkedIn
 
Coldwater
 
October 30, 2014 In This Issue
Weekly Spotlight
Market Roundup
Pulp & Paper
Containerboard/Packaging
New Products
Published Pricing
People
TAPPI News
Naylor, LLC
Weekly Spotlight
This study was commissioned for a second year to monitor improvements following last year's poor results and food safety concerns expressed by growers who were told to ship fruits and vegetables using RPCs (plastic containers) rather than corrugated boxes.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
Mill will be closed by the end of this year because it would need environmental upgrades to comply with the U.S. EPA's updated clean air standards for industrial boilers.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
The project is intended to identify breakthrough technologies to enhance the industry’s sustainability and competitiveness, and to develop advanced materials from forest biomass.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
These prestigious awards are full tuition scholarships. Recipients of the highly competitive awards were selected by a committee comprised of engineering faculty and Paper Science & Engineering Foundation staff.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
This is an invitation to present at the third annual Tissue360° Forum to be held at PaperCon and TAPPI’s Centennial Celebration in Atlanta, Ga., USA, on April 19-22, 2015.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
The TAPPI Yankee Dryer Safety and Reliability Committee (YDSRC) will hold its fall meeting Nov. 4-5, 2014, at Miron Construction in Neenah, Wis., USA.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
TAPPI’s newly redesigned introductory course is being offered, November 6-7, in Neenah Wis., USA.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
Market Roundup
During the first two quarters of 2014, exportation from Canada and the U.S. was slightly more than 1.3 million metric tons in each of the two quarters, which was down from the all-time-high of almost 1.4 million metric tons in the 4Q/13,
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
Bleached hardwood kraft exports, data for dissolving pulp use and production, UKP (unbleached kraft pulp), BSK, BHK, and BCTMP (bleached chemi-thermomechanical pulp) all showed various gains according to both government and private analysis reports.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
Naylor Association Solutions
Pulp & Paper
Temporary curtailment of one of three paper machines at Powell River mill will remove 6,500 metric tons of specialty paper grade capacity from the market.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
Company was recognized this week for its longtime leadership in sustainability with the first-ever annual FSC Leadership Award for the paper sector in a ceremony at the Greenbuild 2014 Conference in New Orleans, La.,
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
More than 200 Michelman (Cincinnati, Ohio, USA) employees around the world put their corporate work down and embraced a day of giving back to their communities.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
This latest investment, now approved, relates to the expansion of the evaporation plant.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
A Voith IntensaDrum SD 35 pulping drum is part of the stock preparation system at Agarwal Industries in Sarigam. .
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
Containerboard/Packaging
Company has invested SEK 260 million at its production unit in Skärblacka, Sweden, that will increase the volume and improve the quality of sack papers produced there.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
Ensocoat is produced at Stora Enso's Imatra Mill in Finland, where Board Machine (BM) No. 2 was started in 1956.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
Two groups this week launched Carton 2 Garden, a nation-wide competition that gives students a hands-on experience in repurposing empty cartons to build or enhance their school garden.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
A logistics team has been working for a couple of years to gradually improve the situation.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
Imatra Mills consists of two units, Kaukopaa and Tainionkoski. Together they produce more than a million tpy of paper and paperboard products.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
Board Referee, designed by the Smurfit Kappa Development Centre in the Netherlands, is the latest in a line of corrugated board innovations by the company. It reportedly is the first to apply the "Three Point Bending" theory (TPB) to packaging.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
New Products
The quickest way to minimize DIM weight (and therefore, shipping costs) is to reduce the overall carton size as well, the company advises, noting that simply shrinking a box by 20% in each direction will reduce the cube size by nearly 50%.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
Published Pricing
The adjustment will be immediately implemented or as existing contracts allow.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
People
Butier will be responsible for the company's operations, with all business unit leaders reporting to him. Donald A. Nolan, president of the Materials Group, will leave the company after a brief transition period.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
The company is world market leader in injection moulding machines.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
Since joining Western in 2006, he has held a number of positions, including SVP of finance. "I thank Brian for his dedication to Western," said Don Demens, president and CEO of Western. "He has been instrumental in the completion of Western's operational turnaround and the restoration of our balance sheet."
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
Pilla attributes a customer-centric and results-driven approach to his successful track record of implementing business efficiencies. Prior to 2011, he served as president of McKesson Canada, a leading provider of health care services.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
TAPPI News
Learn and review the basics of tissue production in Tissue 101.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
The 2014 TAPPI Nominating Committee has announced the 2015 TAPPI Board Slate. See who the nominees are for this upcoming year.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
This event will be held in partnership with Focus on Energy.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
We are seeking artifacts, photos, books, and equipment that represents a stage in our industry’s history.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
The future looks bright to this P&P professional and TAPPI member.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
Honoring our Past, Inspiring Our Future: Speak at the largest program for the pulp and paper industry.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
This book focuses on the keys to a good maintenance program with a concession to today’s busy mill engineers.
Share this articleShare on FacebookShare on TwitterShare on LinkedIn
 
 

Advertise

We would appreciate your comments or suggestions.
Your email will be kept private and confidential.