STAR

The TAPPI Standards regulations require public review of standards that are up for ballot. TAPPI members can view any drafts that are in ballot by logging in to the TAPPI web site (www.tappi.org), clicking on "My TAPPI," and then clicking on the "Standards Public Draft Review" link on the left side of the page. If you would like to review and comment on any draft and are not a member of the corresponding Standard-Specific Interest Group (SSIG), you may view the draft on line or you may request a copy of the draft being balloted by writing to standards@tappi.org. TAPPI members may join SSIGs as permanent members; go to the Subject Category page to download forms for this purpose. Nonmembers of TAPPI may join any SSIG as a voting member; to do so, send a message to standards@tappi.org to receive a copy of the draft and a ballot.

Listed below are TAPPI Standards that have recently gone out for ballot to the corresponding Standard-Specific Interest Group (SSIG). The date in parentheses is the closing date for voting.


T 491 "Water immersion number of paperboard" (January 4, 2013)
T 453 "Effect of dry heat on properties of paper and board" (January 11, 2013)
T 511 "Folding endurance of paper (MIT tester)" (January 18, 2013)
T 274 "Laboratory screening of pulp (MasterScreen-type instrument)" (January 25, 2013)
T 236 "Kappa number of pulp" (January 28, 2013)
T 282 "Hexeneuronic acid content of chemical pulp" (January 28, 2013)
T 406 "Reducible sulfur in paper and paperboard" (January 31, 2013)

The system for review and development of TAPPI Standards requires an announcement of review dates so that any interested TAPPI parties may access the drafts, submit comments, and/or join the Standard-Specific Interest Group (SSIG) to cast an official vote.

Listed below are the Standards that will be up for review in 2013. The date indicated is the target date on which the draft will be posted for review by TAPPI members in the Members Only section of the TAPPI website. On that date, you may go to the home page (www.tappi.org), log on with your member ID and password, place your cursor over "Membership," and select "My TAPPI" from the dropdown box. When your personal page appears, click on the "Standards Public Draft Review" link on the left-hand side. You do not have to be a member of the Standard Specific Interest Group to comment on the draft.

Nonmembers of TAPPI who wish to be part of the voting for any Standard should send a message to standards@tappi.org and request voting membership on the corresponding SSIG, prior to the target ballot date, if possible. Anyone who joins the SSIG before the target balloting date will receive a notice of the ballot. Nonmembers cannot access the drafts online, but they will be sent copies by email upon request after receiving the notice of ballot by email.

If you have joined the Standard Specific Interest Group for any Standard, you will receive a notice for ballot at the proper time with instructions for casting your vote and making your comments. If you wish to join the Standard Specific Interest Group for a particular Standard, please go to the Subject Categories for Standards page or contact the Standards Department at TAPPI (standards@tappi.org ), or phone +1-770-209-7276 or fax +1-770-446-6947).

T 526 cm-04 Blister resistance of coated paper in heatset printing (May 7, 2013)
T 627 om-09 Determination of titanium dioxide (May 14, 2013)
T 648 om-09 Viscosity of coating clay slurry (May 21, 2013)
T 843 om-09 Fluted edge crush of corrugating medium (rigid support method) (June 4, 2013)
T 824 om-09 Fluted edge crush of corrugating medium (flexible beam method) (June 11, 2013)
T 836 om-09 Bending stiffness, four point method (June 18, 2013)
T 825 om-09 Flat crush test of corrugated board (rigid support method) (June 25, 2013)
T 569 om-09 Internal bond strength (Scott type) (July 9, 2013)
T 831 om-09 Water absorption of corrugating medium: water drop penetration test (July 16, 2013)
T 631 om-09 Microbiological enumeration of process water and slush pulp (July 23, 2013)
T 604 om-09 Sulfur dioxide in sulfite cooking liquor (July 30, 2013)
T 1205 sp-09 Dealing with suspect (outlying) test determinations (August 6, 2013)
T 529 om-09 Surface pH measurement of paper (August 13, 2013)
T 650 om-09 Solids content of black liquor (August 20, 2013
T 699 om-09 Analysis of pulping liquors by suppressed ion chromatography (September 10, 2013)
T 534 om-09 Brightness of clay and other mineral pigments (d/0 diffuse) (September 24, 2013)
T 515 om-09 Visual grading and color matching of paper (October 1, 2013)
T 480 om-09 Specular gloss of paper and paperboard at 75 degrees (October 8, 2013)
T 458 cm-04 Surface wettability of paper (angle of contact method) (October 13, 2013)
T 573 sp-09 Accelerated temperature aging of printing and writing paper by dry oven exposure apparatus (October 22, 2013)
T 409 sp-09 Machine direction of paper and paperboard (October 29, 2013)
T 448 om-09 Water vapor transmission rate of paper and paperboard at 23 degrees C and 50% RH (November 5, 2013)
T 455 sp-09 Identification of wire side of paper (November 12, 2013)
T 278 sp-09 Pulp screening (Valley-type screening device) (November 19, 2013)
T 227 om-09 Freeness of pulp (Canadian standard method) (December 3, 2013)
T 259 om-09 Species identification of nonwood plant fibers (December 10, 2013)