STAR

TAPPI

Naylor, LLC
New or Revised Standards, TIPs, and Useful Methods


TIP 0306-15 "Identifying anilox volume measuring equipment" (Revision)
TIP 0304-50 "Techniques to minimize twist warp" (Revision)
UM 200 "Brightness loss of bleached pulp" (Revision and reinstatement)
UM 213 "Repulpability of splices/splicing tape" (Revision and reinstatement of UM)

Special note: Documents appearing in the TAPPI online version of the Standards and TIPs are updated once a month (usually around the 15th). So it is possible that there is a delay between the publication announcement and the posting online. If you are a subscriber to the online access to Standards and TIPs and you are in a hurry for new documents that have not yet been posted, you can send a request to standards@tappi.org.

 
TAPPI Standards in Ballot

The TAPPI Standards regulations require public review of standards that are up for ballot. TAPPI members can view any drafts that are in ballot by logging in to the TAPPI web site (www.tappi.org), clicking on "My TAPPI," and then clicking on the "Standards Public Draft Review" link on the left side of the page. If you would like to review and comment on any draft and are not a member of the corresponding Standard-Specific Interest Group (SSIG), you may view the draft on line or you may request a copy of the draft being balloted by writing to standards@tappi.org. TAPPI members may join SSIGs as permanent members; go to the Subject Category page to download forms for this purpose. Nonmembers of TAPPI may join any SSIG as a voting member; to do so, send a message to standards@tappi.org to receive a copy of the draft and a ballot.

Listed below are TAPPI Standards that have recently gone out for ballot to the corresponding Standard-Specific Interest Group (SSIG). The date in parentheses is the closing date for voting.



T 401 "Fiber analysis of paper and paperboard" (August 31, 2012)
T 552 "Determination of wetting tension of polyolefin films and coated surfaces via the Mayer rod technique" (September 4, 2012)
T 210 "Sampling and testing wood pulp shipments for moisture" (September 4, 2012)
T 248 "Laboratory beating of pulp (PFI mill method)" (September 7, 2012)
T 268 "Weight-volume measurement of pulpwood" (September 21, 2012)
T 230 "Viscosity of pulp (capillary viscometer method)" (September 24, 2012)

 
General Announcements



T 547 "Air permeance of paper and paperboard (Sheffield method)" has been approved as an American National Standard by the ANSI Board of Standards Review.


The notice of this approval will be published in an upcoming issue of ANSI Standards Action.

 


TAPPI is in the initial stages of developing a new TAPPI Standard or TIP for verifying the recyclability of aqueous barrier coatings. We are seeking technical experts in the area of recycling aqueous coatings to work on this proposed standard. Experts do not have to be TAPPI members, although a TAPPI member among the group would need to serve as working group chair for the project..


If you are interested in participating in initial discussion, please contact Scott Springmier (sspringmier@tappi.org).

 
Overdue Reports Distributed


Reports outlining the overdue reviews for Standards and TIPs were sent to the Quality and Standards Management Committee (Q&SMC) on August 10, 2012. Copies of these reports were also sent to the assigned Working Group Chairmen for these overdue reviews as well as to chairmen of the appropriate technical groups in TAPPI.


Anyone who did not receive the overdue reports but who have an interest may obtain copies by requesting them from standards@tappi.org.


Working Group Chairmen: These reports were sent to you for your information and action, if required. Q&SMC may, according to the Standards Guidelines, withdraw any Standards or TIPs whose reviews are overdue, especially if it appears that little progress is being made on the Work Item. If more information or indications of progress on these Work Items are received prior to the next meeting (November 1, 2012), Q&SMC will take these reports of progress under consideration.


If you are working on a Standard that will be ready to go to the Standards Advisory Review Group (SARG) for final approval, please be aware that the SARG agenda must be posted on the web at least 30 days before their next meeting on May 1, 2011. This means that any standards that are ready for SARG must be submitted no later than September 4, 2012, in order to be included in the Fall 2012 SARG agenda.

 
To provide updates regarding these reports, send a message to to standards@tappi.org no later than Monday, October 29, 2012, in order to be able to provide this information to Q&SMC at their next 24meeting.

 
Did You Know
... that to participate in the balloting process for TAPPI Standards you must sign up for the Standard-Specific Interest Groups (SSIGs)? Although drafts for ballot are available for anyone – members or nonmembers – to review and comment on, you must be a TAPPI member in good standing to receive official ballots and cast a vote on new or revised Standards. Each Standard has its own SSIG – so you have to sign up for each Standard that you have an interest in. Links to all of the SSIGs (by subject category) can be found on the Subject Category for Standards web page.
 
Acronyms You May Need to Know

For details on these commonly-used acronyms in the development of TAPPI Standards and TIPs, please see the Standards Guidelines and the TIP Guidelines, or send your questions to standards@tappi.org.

TIP = Technical Information Paper
Q&SMC = Quality and Standards Management Committee
SSIG = Standard-Specific Interest Group
SARG = Standards Advisory Review Group
WI = Work Item
WG = Working Group
WGC = Working Group Chairman
om = Official Method
pm = Provisional Method
sp = Standard Practice
cm = Classical Method
ss = Standard Specification
sg = Standard Guideline
gl = Standard Glossary
wd = Withdrawn Standard
UM = Useful Method

 
Searching and Ordering TAPPI Standards, TIPs, and Useful Methods

Details on how to search and order TAPPI Standards and TIPs can be found on the TAPPI website's Search and Order page.


For Individual TIPs, order Item Number: 0108____ (Insert TIP number)


For Individual Standards, order Item Number: 0104T____ (Insert Standard number)


List price: $49; TAPPI member price: $32. There are no shipping or handling charges for electronic documents.


The 2012 collection of Standards, TIPs, and UMs, published in March of 2012 (product code STUCD-12), is available on CD. An Individual or Company License for access to the continually updated collection of Standards, TIPs, and UMs via the web is the best way to always have a current set of documents accessible. A print-on-demand version of either the Standards, TIPs, or UMs, current and updated as of the date printed, is also available.


For information and quotes on company licenses, contact Lisa Stephens at lstephens@tappi.org or +1-770-209-7293. For regular orders (including individual online licenses), contact Member Connection at 1-800-332-8686 (US), 1-800-446-9431 (Canada), or +1-770-446-1400 (international), or order on line at www.tappi.org.

 
Naylor, LLC