New or Revised Standards, TIPs, and Useful Methods

TIP 0404-61 "Paper machine shower recommendations" (Revision)

Special note: Documents appearing in the TAPPI online version of the Standards and TIPs are updated once a month (usually around the 15th). So it is possible that there is a delay between the publication announcement and the posting online. If you are a subscriber to the online access to Standards and TIPs and you are in a hurry for new documents that have not yet been posted, you can send a request to
TAPPI Standards in Ballot

The TAPPI Standards regulations require public review of standards that are up for ballot. TAPPI members can view any drafts that are in ballot by logging in to the TAPPI web site (, clicking on "My TAPPI," and then clicking on the "Standards Public Draft Review" link on the left side of the page. If you would like to review and comment on any draft and are not a member of the corresponding Standard-Specific Interest Group (SSIG), you may view the draft on line or you may request a copy of the draft being balloted by writing to TAPPI members may join SSIGs as permanent members; go to the Subject Category page to download forms for this purpose. Nonmembers of TAPPI may join any SSIG as a voting member; to do so, send a message to to receive a copy of the draft and a ballot.

Listed below are TAPPI Standards that have recently gone out for ballot to the corresponding Standard-Specific Interest Group (SSIG). The date in parentheses is the closing date for voting.

T New (WI 3019) "Accelerated light aging of printing and writing paper by xenon-arc exposure apparatus" (April 11, 2011)

General Announcements

In response to requests from members who want to better understand how to participate in the development and review of TAPPI Standards and Technical Information Papers (TIPs), a booth will be open at the PaperCon 2011 conference to provide information and to display what Standards and TIPs are up for review in 2011.

Stop by the booth to:
* See all the Standards and TIPs that are up for review in 2011
* Sign up for Standard-Specific Interest Groups (SSIGs) to vote on Standards, and cast your "early vote" on site if you like
* Find out about volunteering to help review TIPs
* Discuss ideas for new Standards or TIPs, and learn how to propose new projects

The booth will share space with TAPPI Membership and TAPPI PRESS and will be located in the Northern Kentucky Conference Center in the Rotunda on the second level. The Standards and TIPs Kickoff booth will be open from 2:00 to 5:00 pm on Monday, May 2, and from 9:00 am to 5:00 pm on Tuesday, May 3.

To read more about the Paper Con Conference, go to


Three proposals for new standards in the area of nanotechnology have been proposed. A Standard-Specific Interest Group (SSIG) must be formed for each of these proposals. Any individuals who are interested in these standards may join any or all of the SSIGs to receive ballots when they are ready for vote. If you would like to join any of the SSIGs, please notify the Standards Department at or by fax at +1-770-446-6947.

The titles and scopes for the three standards are shown below. The WI number indicates the Work Item number; please specify which Work Item(s) SSIGs you would like to join

T New (WI 3021) "Nanocellulose nomenclature and terminology." The scope for nanocellulose nomenclature and terminology standardization shall include manufactured cellulosic fibers from plants and microorganisms with two dimensions in the nanoscale. The ISO definition for nanoscale (approximately 1-100 nm) is adopted for the purpose of this nanocellulose standards-making activity. Standard nomenclature and terminology development for nanocellulose with at least one of the short dimensions in the 100 to 1000 nm range and display size dependent properties shall also be considered. This nanocellulose nomenclature and terminology scope shall cover the entire supply chain starting with manufactured nanocellulosic raw material to nanocellulose derived materials and products, ending with product end-of-life of nanocellulose derived products. This nanocellulose nomenclature and terminology standards development shall also include nomenclature and terminology of phenomena and equipment, nanoscale or otherwise, in manufacturing processes nanocelluloses encounter. Nomenclature and terminologies developed in this standards developing process will also have implications in product stewardship and environment, health and safety regulations.

T New (WI 3022) "Representative cellulosic nanomaterials for environmental, health and safety studies." This specification identifies base-case cellulosic nanomaterials that will be used for environment, health and safety (EHS) evaluations. Cellulose nanomaterials can be produced from a wide variety of tree species as well as non-woody plants. Therefore. cellulosic nanomaterials produced from different species and differing processing conditions could well possess differing EHS impacts. However, there are limiting factors such as only a small subset of tree species has important commercial value and wide spread use. In addition, it may also be that the range of variation in EHS impacts may be relatively small for the range of cellulosic nanomaterials that are commercially important.

T New (WI 3023) "Methodology for the classification and categorization of nanocelulose." This standard provides guidance on the preparation of comprehensive technical specifications for the characteristics of manufactured nanocellulose and their measurement methods in order to ensure the delivery of product that gives a consistent response in processing and/or final performance. The document includes guidance on specifying the physical and chemical characteristics of manufactured nanocellulose, which might affect performance or subsequent processing. The listed measurement methods are not normative but informative. The nanocellulose may be supplied in a dry form or as dispersions in a liquid medium. This document does not include guidance on specifying the environmental, health and safety (EHS) characteristics of manufactured nano-objects. However, nanotechnology is a rapidly growing and evolving field. Therefore, users of this document should maintain an awareness of the legislative environment and latest developments in EHS regarding nanotechnology. The document does not specify quantitative requirements for the object to be considered a nano-object but lists appropriate examples of characteristics and properties and their measurement methods useful for specifying nano-objects. Characteristics and measurement methods for nano devicing technology are not included. Although this document refers to parameters, which could be considered to be aspects of material quality, it is not intended as providing guidance on the establishment of quality management systems.

Standards Coming Up For Review

The following standards are up for review in 2011. Please see the separate article on the Standards and TIPs Kickoff Meeting to be held in May 2011 at Paper Con.

T 808 om-07 Flat crush test of corrugated board (flexible beam method) (May 10, 2011)
T 811 om-07 Edgewise compressive strength of corrugated fiberboard (short column test) (May 17, 2011)
T 822 om-07 Ring crush of paperboard (rigid support method) (June 7, 2011)
T 449 om-07 Bacteriological examination of paper and paperboard (June 10, 2011)
T 281 sp-07 Open drum washer mat sampling technique (June 14, 2011)
T 252 om-07 pH and electrical conductivity of hot water extracts of pulp, paper, and paperboard (June 17, 2011)
T 211 om-07 Ash in wood, pulp, paper and paperboard: combustion at 525°C (June 21, 2011)
T 1212 sp-07 Light sources for evaluating papers including those containing fluorescent whitening agents (June 24, 2011)
T 1214 sp-07 Interrelation of reflectance, R0; reflectivity, R ; TAPPI opacity, C0.89; scattering, s; and absorption, k (June 28, 2011)
T 1217 sp-07 Photometric linearity of optical properties instruments (July 8, 2011)
T 1218 sp-07 Calibration of reflectance standards for hemispherical geometry (July 12, 2011)
T 575 om-07 Roughness of paper and paperboard,stylus (Emveco-type) method (July 15, 2011)
T 530 om-07 Size test for paper by ink resistance (Hercules-type method) (July 19, 2011)
T 512 sp-07 Creasing of flexible packaging material paper specimens for testing (July 22, 2011)
T 547 om-07 Air permeance of paper and paperboard (Sheffield method) (July 26, 2011)
T 277 om-07 Macro stickies content in pulp: the "pick-up" method (July 29, 2011)
T 240 om-07 Consistency (concentration) of pulp suspensions (August 2, 2011)
T 212 om-07 One percent sodium hydroxide solubility of wood and pulp (August 5, 2011)
T 559 cm-02 Grease resistance test for paper and paperboard (August 9, 2011)
T 665 cm-02 Analysis of talc (August 12, 2011)
T 483 cm-02 Odor of packaging materials (August 16, 2011)
T 433 cm-02 Water resistance of sized paper and paperboard (dry indicater method) (August 19, 2011)
T 234 cm-02 Coarseness of pulp fibers (August 23, 2011)
T 257 cm-02 Sampling and preparing wood for analysis (August 26, 2011)
T 552 om-07 Determination of wetting tension of polyolefin films and coated surfaces via the mayer rod technique (August 30, 2011)
T 802 om-07 Drop test for fiberboard shipping containers (September 2, 2011)
T 815 om-07 Coefficient of static friction (slide angle) of packaging and packaging materials (including shipping sack papers, corrugated and solid fiberboard) (inclined plane method) (September 9, 2011)
T 834 om-07 Determination of containerboard roll hardness (September 13, 2011)
T 832 om-07 Water absorption of corrugating medium: float curl method (September 16, 2011)
T 838 om-07 Edge crush test using neckdown (September 20, 2011)
T 1200 sp-07 Interlaboratory evaluation of test methods to determine TAPPI repeatability and reproducibility (September 23, 2011)
T 527 om-07 Color of paper and paperboard (d/0, C/2) (October 7, 2011)
T 524 om-07 Color of paper and paperboard (45/0, C/2) (October 11, 2011)
T 1219 sp-07 Storage of paper samples for optical measurements and color matching (October 14, 2011) T 653 om-07 Specular gloss of paper and paperboard at 20° (October 18, 2011)
T 1215 sp-07 The determination of instrumental color differences (October 21, 2011)
T 1216 sp-07 Indices for whiteness, yellowness, brightness, and luminous reflectance factor (October 25, 2011)
T 536 om-07 Resistance of paper to passage of air (high-pressure Gurley method) (November 8, 2011)
T 568 om-07 Physical area of sub-visible contraries in pulp, paper, and paperboard by image analysis (November 11, 2011)
T 275 sp-07 Screening of pulp (Somerville-type equipment) (November 18, 2011)
T 271 om-07 Fiber length of pulp and paper by automated optical analyzer using polarized light (December 2, 2011)
T 282 pm-07 Hexeneuronic acid content of chemical pulp (December 9, 2011)

Announcement of SARG Meeting

The next meeting of the Standards Advisory Review Group (SARG) is scheduled for Sunday, May 1, 2011, 3:30 pm Eastern time, at the Cincinnati Marriott River Center Hotel, Covington, KY, the site of the 2011 TAPPI PaperCon Conference. The meeting will be in the Covington 1 Room (section of Grand Ballroom). SARG approval is the last step prior to publication for any new or revised standard.

In order to act on any appeals from TAPPI members relevant to the standards up for approval, the SARG meeting is open to anyone for participation. The agenda has been posted on the SARG page. There are links from the agenda items to the final drafts that are up for approval.

If you would like to participate by conference call, please send a message before April 27, 2011, to

Overdue Reports Distributed

Reports outlining the overdue reviews for Standards and TIPs were sent to the Quality and Standards Management Committee (Q&SMC) on February 23, 2011. Copies of these reports were also sent to the assigned Working Group Chairmen for these overdue reviews as well as to chairmen of the appropriate technical groups in TAPPI.

Anyone who did not receive the overdue reports but who have an interest may obtain copies by requesting them from

Working Group Chairmen: These reports were sent to you for your information and action, if required. Q&SMC may, according to the Standards Guidelines, withdraw any Standards or TIPs whose reviews are overdue, especially if it appears that little progress is being made on the Work Item. If more information or indications of progress on these Work Items are received prior to the next meeting (May 1, 2011), Q&SMC will take these reports of progress under consideration.

To provide updates regarding these reports, send a message to to  no later than Tuesday, April 26, 2011, in order to be able to provide this information to Q&SMC at their May 1 meeting.

Acronyms You May Need to Know

For details on these commonly-used acronyms in the development of TAPPI Standards and TIPs, please see the Standards Guidelines and the TIP Guidelines, or send your questions to

TIP = Technical Information Paper
Q&SMC = Quality and Standards Management Committee
SSIG = Standard-Specific Interest Group
SARG = Standards Advisory Review Group
WI = Work Item
WG = Working Group
WGC = Working Group Chairman
om = Official Method
pm = Provisional Method
sp = Standard Practice
cm = Classical Method
ss = Standard Specification
sg = Standard Guideline
gl = Standard Glossary
wd = Withdrawn Standard
UM = Useful Method


For details on these commonly-used acronyms in the development of TAPPI Standards and TIPs, please see the Standards Guidelines and the TIP Guidelines, or send your questions to

TIP = Technical Information Paper
Q&SMC = Quality and Standards Management Committee
SSIG = Standard-Specific Interest Group
SARG = Standards Advisory Review Group
WI = Work Item
WG = Working Group
WGC = Working Group Chairman
om = Official Method
pm = Provisional Method
sp = Standard Practice
cm = Classical Method
ss = Standard Specification
sg = Standard Guideline
gl = Standard Glossary
wd = Withdrawn Standard
UM = Useful Method

Searching and Ordering TAPPI Standards, TIPs, and Useful Methods

Details on how to search and order TAPPI Standards and TIPs can be found on the TAPPI website's Search and Order page.

All individual TIPs or Standards are available for electronic or paper delivery. For electronic delivery, the documents are e-mailed in PDF format. Hard copy documents can be mailed or faxed, but shipping and handling costs will apply.

For Individual Standards, order Item Number: 0104T____ (Insert Standard number)
For Individual TIPs, order Item Number: 0108____ (Insert TIP number)
For Individual Useful Methods order item number: 0104UM_____ (Insert Useful Method number)

List price: $49; TAPPI member price: $32. There are no shipping or handling charges for electronic documents.

The full collection is available on CD. Beginning in March 2011, there is one CD containing all Standards, TIPs, and UMs. An Individual or Company License for access to the continually updated collection of Standards, TIPs, and UMs via the web is the best way to always have a current set of documents accessible. A print-on-demand version of either the Standards or the TIPs set, current and updated as of the date printed, is also available.

For information and quotes on company licenses, contact Lisa Stephens at or +1-770-209-7293. For regular orders (including individual online licenses), contact Member Connection at 1-800-332-8686 (US), 1-800-446-9431 (Canada), or +1-770-446-1400 (international), or order on line at