Archive | Subscribe | Printer-Friendly Version | Advertise | tappi.org | TAPPI Press Catalog July 2017
Be more efficient and keep up-to-date with TAPPI Standards & TIPs... Access them online either as a subscriber to either an Individual or Company License. See information on the Web for Individual Licenses and Company Licenses or call TAPPI at 1-800-332-8686 (US), 1-800-446-9431 (Canada), or +1-770-446-1400 (International).
New or Revised Standards, TIPs, and Useful Methods
TIP 0402-24 "Guide to the use of stainless steel pipe specifications" (Revised)

Special note:  Documents appearing in the TAPPI online version of the Standards and TIPs are updated once a month (usually around the 15th). So it is possible that there is a delay between the publication announcement and the posting online. If you are a subscriber to the online access to Standards and TIPs and you are in a hurry for new documents that have not yet been posted, you can send a request to standards@tappi.org

 
TAPPI Standards in Ballot
The TAPPI Standards regulations require public review of standards that are up for ballot. Send a message to standards@tappi.org if you want to request a copy of draft in ballot.

T 240 om-12 "Consistency (concentration) of pulp suspensions" (July 1, 2017)

T 212 om-12 "One percent sodium hydroxide solubility of wood and pulp" (July 6, 2017)

T 421 om-12 "Qualitative (including optical microscopic) analysis of mineral filler and mineral coating of paper" (August 27, 2017)
 
General Announcements
TAPPI's Standards program is undergoing an audit in order to fulfill our duties as an accredited American National Standards Developer. We appreciate your patience during this time as we prioritize our efforts on completing this audit. 
 

Product & Product Quality Division committees are in need of new members to support the development and maintenance of standards we all use in the manufacture of the products we deliver to our customers.

These committees discuss and make decisions on critical issues that deal with standards which are currently being used by the pulp and paper industry, as well as those which are being developed for them. 
 
Below are the committees which are in need of your support:

Pulp and Chemical Properties Committee

Optical Properties Committee

Physical Properties Committee

Tissue Properties Subcommittee

Joining one or more of these groups gives you and your company the opportunity to participate in the discussion and development of the standards we use for evaluating the product and product quality. Without good pulp and paper industry standards to guide us, we will not be able to deliver what our customers require.  Therefore, please consider volunteering your company and your support for these committees. 

For all those members who are already involved in Standard Specific Interest Groups (SSIG), we ask you to make the next step in standard development and maintenance participation by joining a committee today.

Meetings are held twice a year to discuss ongoing committee work. The meetings can be attended in person or by phone conference. 
  
Please contact Steve Berg, P&PQ Division Chairman (sberg@thwingalbert.com) or Laurence Womack, Director of Standards and Awards (standards@tappi.org) for more information.

 

Getting started is easy. Do you have just a general idea for a standard, or are you farther along and have a substantial draft? If you just have a general idea for a standard or TIP, complete the New Idea Submission Form. TAPPI will review your idea and identify an appropriate committee or group to work on your suggestion. If you are further along, send an initial draft to standards@tappi.org. From there, the TAPPI Standards Manager will guide you through the appropriate process to finalize and approve the new document.
 
 
SSIG Members Needed
All Standard-Specific Interest Groups (SSIG) require a minimum of 10 members in order to ballot and vote on a draft of a method.

T 438 cm-06 "Zinc and cadmium in paper" requires two more SSIG members for ballot.

If no progress is made on these ballots, then they might be considered for withdrawal at the next QSMC meeting. If you have an interest in becoming a member of either of these SSIGs please contact standards@tappi.org.
 
Acronyms You May Need to Know

For details on these commonly-used acronyms in the development of TAPPI Standards and TIPs, please see the Standards Guidelines and the TIP Guidelines, or send your questions to standards@tappi.org.

TIP = Technical Information Paper
Q&SMC = Quality and Standards Management Committee
SSIG = Standard-Specific Interest Group
SARG = Standards Advisory Review Group
WI = Work Item
WG = Working Group
WGC = Working Group Chairman
om = Official Method
pm = Provisional Method
sp = Standard Practice
cm = Classical Method
ss = Standard Specification
sg = Standard Guideline
gl = Standard Glossary
wd = Withdrawn Standard
UM = Useful Method

 
Searching and Ordering TAPPI Standards, TIPs, and Useful Methods

Details on how to search and order TAPPI Standards, TIPs and Useful Methods can be found on the TAPPI website's Search and Order page.

For Individual TIPs, order Item Number: 0108____ (Insert TIP number)

For Individual Standards, order Item Number: 0104T____ (Insert Standard number)

For individual Useful Methods, order Item Number 0104UM____ (insert UM number)


List price: $49; TAPPI member price: $32. There are no shipping or handling charges for electronic documents.

 

The 2016 collection of Standards, TIPs, and UMs, published in May of 2016 (product code STUCD-16), is available on CD. An Individual or Company License for access to the continually updated collection of Standards, TIPs, and UMs via the web is the best way to always have a current set of documents accessible. A print-on-demand version of either the Standards, TIPs, or UMs, current and updated as of the date printed, is also available. 

For information and quotes on company licenses, contact Mary Anne Cauthen (MCauthen@tappi.org) or +1-770-209-7352. For regular orders (including individual online licenses), contact Member Connection at 1-800-332-8686 (US), 1-800-446-9431 (Canada), or +1-770-446-1400 (international), or order on line at www.tappi.org.

 

TAPPI Standards, TIPs and Useful Methods Online Subscription gives you point-and-click access, providing immediate answers anytime problems arise.

You’ll save $186 alone by purchasing a subscription to Standards, TIPs and Useful Methods Online along with a TAPPI membership.  This offer also applies each year you renew your membership.

By joining TAPPI, you receive substantial savings on all TAPPI events, products and services and receive Paper 360, TAPPI Journal and Specialty Newsletters.

Combine the Power of TAPPI Membership and the Quality of Performance by purchasing a TAPPI membership along with Standards online.  Be a part of the TAPPI Community.

TAPPI Membership $174 + Standards Online $125 = $299 with membership renewal
Individual Standards Online without membership renewal = $250
Non-members Standards Online = $485

TAPPI Standards, TIPs and Useful Methods – on demand – anytime, anywhere.

 


 
 

FacebookFind us on Facebook

LinkedInNetwork with us on LinkedIn

TwitterFollow us on Twitter

 

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standards or TIPs. This message is being sent to you because of your affiliation with TAPPI; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Suite 115 | Peachtree Corners, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)
TAPPI Privacy Policy

We would appreciate your comments or suggestions. Your email will be kept private and confidential.