Archive | Subscribe | Printer-Friendly Version | Advertise | tappi.org | TAPPI Press Catalog April 2016
Be more efficient and keep up-to-date with TAPPI Standards & TIPs... Access them online either as a subscriber to either an Individual or Company License. See information on the Web for Individual Licenses and Company Licenses or call TAPPI at 1-800-332-8686 (US), 1-800-446-9431 (Canada), or +1-770-446-1400 (International).
NES Company
New or Revised Standards, TIPs, and Useful Methods
TIP 0416-08 "Guidelines for replacement of generating bank tubes with expanded joints in two-drum boilers" (Revision)

T 684 "Gross heating value of black liquor" (Reaffirmed)

T 1006 "Testing of fiber glass mats:  use of modified TAPPI procedures for sampling and lot acceptance, stiffness, tear resistance, and thickness" (Revision)

TIP 0404-47 "Paper machine performance guidelines" (April 1, 2016)

Special note:  Documents appearing in the TAPPI online version of the Standards and TIPs are updated once a month (usually around the 15th). So it is possible that there is a delay between the publication announcement and the posting online. If you are a subscriber to the online access to Standards and TIPs and you are in a hurry for new documents that have not yet been posted, you can send a request to standards@tappi.org

 
TAPPI Standards in Ballot

The TAPPI Standards regulations require public review of standards that are up for ballot. Send a message to standards@tappi.org if you want to request a copy of draft in ballot.

Listed below are TAPPI Standards that have recently gone out for ballot to the corresponding Standard-Specific Interest Group (SSIG). The date in parentheses is the closing date for voting.

T 811 "Edgewise compressive strength of corrugated fiberboard (short column test)" (May 21, 2016)

T 578 "Accelerated light aging of printing and writing paper by xenon-arc exposure apparatus" (May 23, 2016)


 
General Announcements
TAPPI has recently launched a revamped website. If you haven't seen it yet, now would be a good time to check it out! (www.tappi.org)

We are very excited to bring this new experience to you, so please feel free to send us feedback and tell us how you feel. We are aware that there will be some minor difficulties during this transition period, so please bear with us as you experience broken links or issues navigating the new site. 

 

Product & Product Quality Division committees are in need of new members to support the development and maintenance of standards we all use in the manufacture of the products we deliver to our customers.

These committees discuss and make decisions on critical issues that deal with standards which are currently being used by the pulp and paper industry, as well as those which are being developed for them. 
 
Below are the committees which are in need of your support:

Pulp and Chemical Properties Committee

Optical Properties Committee

Physical Properties Committee

Tissue Properties Subcommittee

Joining one or more of these groups gives you and your company the opportunity to participate in the discussion and development of the standards we use for evaluating the product and product quality. Without good pulp and paper industry standards to guide us, we will not be able to deliver what our customers require.  Therefore, please consider volunteering your company and your support for these committees. 

For all those members who are already involved in Standard Specific Interest Groups (SSIG), we ask you to make the next step in standard development and maintenance participation by joining a committee today.

Meetings are held twice a year to discuss ongoing committee work. The meetings can be attended in person or by phone conference. 
  
Please contact Steve Berg, P&PQ Division Chairman (sberg@thwingalbert.com) or Laurence Womack, Director of Standards and Awards (standards@tappi.org) for more information.

 

Getting started is easy. Do you have just a general idea for a standard, or are you farther along and have a substantial draft? If you just have a general idea for a standard or TIP, complete the New Idea Submission Form. TAPPI will review your idea and identify an appropriate committee or group to work on your suggestion. If you are further along, send an initial draft to standards@tappi.org. From there, the TAPPI Standards Manager will guide you through the appropriate process to finalize and approve the new document.
 
SSIG Members Needed
All Standard-Specific Interest Groups (SSIG) require a minimum of 10 members in order to ballot and vote on a draft of a method.

T 602 cm-06 "Analysis of sulfuric acid" needs one more member to join the SSIG.

T 438 cm-06 "Zinc and cadmium in paper" requires three more SSIG members for ballot.

If no progress is made on these ballots, then they might be considered for withdrawal at the next QSMC meeting. If you have an interest in becoming a member of either of these SSIGs please contact standards@tappi.org.
 
Standards Coming Up For Review
The following standards are scheduled for review on the date indicated:

T 281 sp-12 "Open drum washer mat sampling technique" (May 2, 2016)

T 504 cm-07 "Glue in paper (qualitative and quantitative determination)" (May 10, 2016)

T 611 cm-07 "Analysis of bleaching powder, calcium hypochlorite bleach liquor, and bleach sludge" (May 12, 2016)

T 656 cm-07 "Measuring, sampling, and analyzing white waters" (May 17, 2016)

T 418 cm-07 "Organic nitrogen in paper and paperboard" (May 19, 2016)

If you wish to vote on the listed methods, or contribute to the discussion, then join the SSIG today by contacting standards@tappi.org.

 
Standards Ready for Final Approval at SARG
The standards eligible for approval at SARG are listed below. The asterisks (*) indicate the standards that will be eligible for submission to ANSI for consideration as American National Standards.

*T 538 "Roughness of paper and paperboard"
*T 220 "Physical testing of pulp handsheets"
*T 465 "Static creasing of paper for water vapor transmission tests"
*T 435 "Hydrogen ion concentration (pH) of paper extracts (hot extraction method)"
*T 460 "Air resistance of paper (Gurley method)"
T 462 "Castor-oil penetration test for paper"
*T 556 "Bending resistance of paper and paperboard by single-point bending methods"
T 627 "Determination of titanium dioxide"
*T 1009 "Tensile strength and elongation at break for fiber glass mats"
*T 564 "Transparent chart for the estimation of defect size"
*T 263 "Identification of wood and fibers from conifers"
*T 537 "Dirt count in paper and paperboard (optical character recognition – OCR)"
*T 807 "Bursting strength of linerboard"
*T 543 "Bending resistance of paper (Gurley-type tester)"
*T 822 "Ring crush of paperboard (rigid support method)"
*T 425 "Opacity of paper (15/d geometry, illuminant A/2 degrees, 89% reflectance backing and paper backing)"
*T 258 "Basic density and moisture content of pulpwood"
 
Announcement of SARG Meeting

The next meeting of the Standards Advisory Review Group (SARG) is will take place in Cincinnati, OH, at the TAPPI 2016 PaperCon Conference, Wednesday, May 18, 2016, at 1:30 pm Eastern time.  SARG approval is the last step prior to publication for any new or revised standard.

In order to act on any appeals from TAPPI members relevant to the standards up for approval, the SARG meeting is open to anyone for participation. The agenda will be posted on the SARG page at least 50 days prior to the meeting, in accordance with TAPPI’s guidelines. There will be links from the agenda items to the final drafts that are up for approval.

If you would like to participate in the SARG meeting by conference call, please send a message before May 13, 2016, to standards@tappi.org

 
Acronyms You May Need to Know

For details on these commonly-used acronyms in the development of TAPPI Standards and TIPs, please see the Standards Guidelines and the TIP Guidelines, or send your questions to standards@tappi.org.

TIP = Technical Information Paper
Q&SMC = Quality and Standards Management Committee
SSIG = Standard-Specific Interest Group
SARG = Standards Advisory Review Group
WI = Work Item
WG = Working Group
WGC = Working Group Chairman
om = Official Method
pm = Provisional Method
sp = Standard Practice
cm = Classical Method
ss = Standard Specification
sg = Standard Guideline
gl = Standard Glossary
wd = Withdrawn Standard
UM = Useful Method

 
Searching and Ordering TAPPI Standards, TIPs, and Useful Methods

Details on how to search and order TAPPI Standards, TIPs and Useful Methods can be found on the TAPPI website's Search and Order page.

For Individual TIPs, order Item Number: 0108____ (Insert TIP number)

For Individual Standards, order Item Number: 0104T____ (Insert Standard number)

For individual Useful Methods, order Item Number 0104UM____ (insert UM number)


List price: $49; TAPPI member price: $32. There are no shipping or handling charges for electronic documents.

 

The 2015 collection of Standards, TIPs, and UMs, published in May of 2015 (product code STUCD-15), is available on CD. An Individual or Company License for access to the continually updated collection of Standards, TIPs, and UMs via the web is the best way to always have a current set of documents accessible. A print-on-demand version of either the Standards, TIPs, or UMs, current and updated as of the date printed, is also available. 

For information and quotes on company licenses, contact Mary Anne Cauthen (MCauthen@tappi.org) or +1-770-209-7352. For regular orders (including individual online licenses), contact Member Connection at 1-800-332-8686 (US), 1-800-446-9431 (Canada), or +1-770-446-1400 (international), or order on line at www.tappi.org.

 

TAPPI Standards, TIPs and Useful Methods Online Subscription gives you point-and-click access, providing immediate answers anytime problems arise.

You’ll save $186 alone by purchasing a subscription to Standards, TIPs and Useful Methods Online along with a TAPPI membership.  This offer also applies each year you renew your membership.

By joining TAPPI, you receive substantial savings on all TAPPI events, products and services and receive Paper 360, TAPPI Journal and Specialty Newsletters.

Combine the Power of TAPPI Membership and the Quality of Performance by purchasing a TAPPI membership along with Standards online.  Be a part of the TAPPI Community.

TAPPI Membership $174 + Standards Online $125 = $299 with membership renewal
Individual Standards Online without membership renewal = $250
Non-members Standards Online = $485

TAPPI Standards, TIPs and Useful Methods – on demand – anytime, anywhere.

 
 
Naylor Association Solutions

FacebookFind us on Facebook

LinkedInNetwork with us on LinkedIn

TwitterFollow us on Twitter

 

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standards or TIPs. This message is being sent to you because of your affiliation with TAPPI; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Suite 115 | Peachtree Corners, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)
TAPPI Privacy Policy

We would appreciate your comments or suggestions. Your email will be kept private and confidential.