Print this article | Send to Colleague

The list below shows Standards that are ready to be submitted to SARG at its Spring2024 meeting:
* = indicates Standards eligible for submission as American National Standards

*T 1008 sp-15 Test conditions for fiberglass mat test methods (Revision)
*T 1015 sp-15 Fiber glass mat uniformity (visual defects) (Revision)
*T 1200 sp-19 Interlaboratory evaluation of test methods to determine TAPPI repeatability and reproducibility (Reaffirmation)
*T 205 sp-18 Forming handsheets for physical tests of pulp (Reaffirmation)
T 234 cm-12 Coarseness of pulp fibers (Reaffirmation)
*T 266 om-18 Determination of sodium, calcium, copper, iron and manganese in pulp and paper by atomic absorption spectroscopy (Reaffirmation)
*T 453 sp-19 Effect of dry heat on properties of paper and board (Reaffirmation)
T 458 cm-14 Surface wettability of paper (angle of contact method) (Reaffirmation)
*T 527 om-19 Color of paper and paperboard (d/0, C/2) (Reaffirmation)
T 625 cm-14 Analysis of soda and sulfate black liquor (Reaffirmation)
*T 631 om-16 Microbiological enumeration of process water and slush pulp (Reaffirmation)
*T 812 om-19 Ply separation of solid and corrugated fiberboard (wet) (Reaffirmation)
*T 815 om-18 Coefficient of static friction (slide angle) of packaging and packaging materials (including shipping sack papers, corrugated and solid fiberboard) (inclined plane method) (Revision)
*T 825 om-14 "Flat crush test of corrugated board (rigid support method)" (Revision)
*T 834 om-18 Determination of containerboard roll hardness (Reaffirmation)
*T 839 om-18 Edgewise compressive strength of corrugated fiberboard using the clamp method (short column test) (Revision)
WI 3039 Extensional viscosity of coating color measured as Euler number using orifice rheometer (New Standard)

A copy of the final draft for all these Standards can be found in the SARG page at https://www.tappi.org/Get-Involved/Develop-Standards-Methods/standards-advisory-review-group/

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)