Archive | Advertise | tappi.org June 2023

Print Print this article | Send to Colleague

TAPPI TIP 0304-24: Calibration and maintenance of the burst tester

Scope: The burst tester may be used when performing bursting strength tests on paper, paperboard, linerboard, corrugated board, and solid fiberboard.

Bursting strength of corrugated board is a requirement of various carrier regulations and governmental specifications. Bursting strength of linerboard is critical because paper mills may use this property to control their process in order to conform to the regulations and specifications mentioned above. The burst test is relatively simple to perform but is susceptible to serious errors if the instrument is not properly maintained.

Publishing date: March 2023
Purchasing linkhttps://imisrise.tappi.org/TAPPI/Products/01/0108030424.aspx


 Fig. 3. Platens in clamped position, with wing nut loosened
Fig. 4. High pressure gauge registering 150 psi (1035 kPa) clamping force

Working Group Members:
Jim Pauw – Chair, Mitchel Lincoln Packaging
Jerry Loza – Packaging Corporation of America
Jeff Gebauer – Niagara Sheets, LLC

Do you have an idea for a NEW TAPPI Standard or Technical Information Paper? We want to hear about it! Please fill out and submit the New Idea Submission form.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)