Archive | Advertise | tappi.org November 2021

Print Print this article | Send to Colleague

The Standard-Specific Interest Groups (SSIGs) for the following Standards are in need of additional members. These groups may or may not have ballots currently open.

All Standard-Specific Interest Groups (SSIG) require a minimum of 10 members in order to ballot and vote on a draft of a method. The following test methods do not have the required minimum number of members to initiate a ballot:

 

Alkaline Pulping

T 692 om-13      Determination of suspended solids in kraft green and white liquors

                            Draft 2                                Current SSIG Count = 6 

 

 Chemical Properties
 

 

T 434 cm-10       Acid-soluble iron in paper                                       

                            Automatic review - 10/2019           Current SSIG Count = 9

 

T 493 cm-10       Identification and determination of melamine resin in paper   

                            Automatic review - 10/2019         Current SSIG Count = 9

 

T 600 om-15       Analysis of formaldehyde in aqueous solutions and of free formaldehyde in resins 

                            Automatic review - 10/2019         Current SSIG Count = 9 

 

T 621 cm-10       Analysis of rosin                                                        

                            Automatic review - 10/2019         Current SSIG Count = 9

 

T 628 cm-10       Analysis of rosin size                                                 

                            Automatic review - 10/2019        Current SSIG Count = 9 

 

Fillers and Pigments
 
T438 cm-06  Zinc and Cadmium in Paper
                      Draft 2                                              Current SSIG Count = 9

 

Optical Properties
 

T 1214 sp-17  Interrelation of reflectance, R0; reflectivity, R ; TAPPI opacity, C0.89; scattering, s;
and absorption, k
                        Automatic review - 10/2021           Current SSIG Count = 8

 

T 1219 sp-17  Storage of paper samples for optical measurements and color matching
                        Automatic review - 10/2021           Current SSIG Count = 9

 

Sulfite and Semichemical Pulping
 
 T 604 cm-09  Sulfur dioxide in sulfite cooking liquor
                        Draft 2                                            Current SSIG Count = 5

 

Participating in a SSIG is free and open to anyone interested. Join now!

If no progress is made on balancing these SSIGs, then the respective methods may be considered for withdrawal at the next Q&SMC meeting. If you have an interest in becoming a member of either of these SSIGs please contact standards@tappi.org. or visit tappi.org/JoinStandards.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)