Print this article | Send to Colleague

Check here the list of TAPPI Technical Information Papers (TIPs) recently published:

TIP 0410-14 Generalized Method for Determining the Pipe Friction Loss of Flowing Pulp Suspensions (Revised)
TIP 0404-50 Paper Machine and Room Ventilation Systems Guidelines (Revised)
TIP 0425-01 Guidelines for Routine Periodic Inspection and Testing of Yankee and MG dryers (Revised)
TIP 0306-09 Ink Metering Systems for Corrugated Flexo Presses (Revised)
TIP 0404-24 Guidelines for the Design, Operation, Performance Evaluation, and Troubleshooting of a Paper Machine Hood and Air Systems (Revised)
TIP 0304-30 Use, Calibration and Maintenance of the Manually Operated Paper Micrometers (Revised)
TIP 0410-05 Head of Stock Behind Slice (Head/Jet and Slice Flow Rate Relationships) (Revised)
TIP 0404-63 Paper Machine Energy Conservation (Revised)
TIP 0502-21 Automated Scanning for Moisture Content and Air Permeability on Paper Machine Felts (New)
TIP 0305-25 Buying, Storing, and Handling P.V.A. Adhesives Used on Folder Gluers and on Sheet Laminators (Revised)
TIP 0402-36 Guidelines for Detection, Monitoring and Prevention of Flow Accelerated Corrosion (FAC) in the Pulp and Paper Mill (Revised)
TIP 0305-33 Cleanup Procedures for Flexo Folder Gluer/Rotary Die Cutters (Revised)
TIP 0304-02 Box Plant Quality Measurement: Why Test? (Revised)
TIP 0425-02 Design, Operation, Performance Evaluation, and Inspection guidelines for Yankee Hood Systems (Revised)
TIP 0402-39 Guidelines for Rotary Lime Kiln Refractory (NEW)

Special thanks to the members below for being  Working Group Chairs in  recently published reviews of TAPPI TIPs:

Douglas Boussfield - TIP 0404-14 - WGC 
Clive Butler - TIP 0425-01 - WGC 
Mark Harrison -TIP 0404-24 and TIP 0404-14 - WGC 
Peter Synder - TIP 0306-09 - WGC 
Steve Schmidt - TIP 0304-30 - WGC 
Alfred Li - TIP 0410-05 - WGC 
Dick Reese - TIP 0404-63 - WGC 
David Zerr - TIP 0502-21 - WGC 
Steve Schmidt - TIP 0305-25 - WGC 
Ron Lansing - TIP 0402-36 - WGC 
John Buzzell - TIP 0305-33 - WGC 
Dave Carlson - TIP 0304-02 - WGC 
Lawrence Yane - TIP 0425-02 - WGC 
Christopher Macey - TIP 0402-39 - WGC 

Special note: Documents appearing in the TAPPI online version of the Standards and TIPs are updated once a month (usually around the 15th). So it is possible that there is a delay between the publication announcement and the posting online. If you are a subscriber to the online access to Standards and TIPs and you are in a hurry for new documents that have not yet been posted, you can send a request for TIPs to tip@tappi.org or for Standards to standards@tappi.org.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)