Archive | Advertise | March 2020

Print Print this article | Send to Colleague

Listed below are TAPPI TIPs that were recently submitted to the Working Group for review. The date when the Work Item was opened is shown for each TIP, as well as the Subject Category under which the TIP is assigned and the Working Group Chair's (WGC) name. The target completion date for the review of each TIP is one year after the opening of the Work Item.

0418 - Process Engineering

01/15/2020 TIP 0418-02 Recausticizing material balance equations relating to digester requirements WGC: Subra Arasakesari

1205 - Nonwovens Fibers

03/02/2020 TIP 1205-02 Cotton in nonwovens WGC: Dr. Seshadri Ramkumar

0402 - Corrosion & Materials Engineering

03/02/2020 TIP 0402-03 Guidelines for corrosion resistant weld metal overlay of digester vessels in alkaline pulping service WGC: Nathan Mixon

If you would like to participate in the Working Group to review any of these TIPs, please write to

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.


TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 |
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)