Print this article | Send to Colleague

Listed below are TAPPI TIPs that were recently submitted to the Working Group for review. The date when the Work Item was opened is shown for each TIP, as well as the Subject Category under which the TIP is assigned and the Working Group Chair's (WGC) name. The target completion date for the review of each TIP is one year after the opening of the Work Item.

0304 - Corrugated - Opened on 2/6/2020
0304-26 Common curtain coating problems: causes, detection and correction WGC: Peter Snyder

0304-60 A method to proof a flexo printing ink WGC: Tom Staal

0404 - Water Removal - Opened on 2/11/2020
0404-31 Recommended dryer differential pressures  WGC: Greg Wedel

0404-35 Application of dryer bars WGC: Greg Wedel

0416 - Energy, Recovery and Recaust - Opened on 1/30/2020
0416-24 (Formerly 0422-01) Energy checklist: pulp mill  WGC: Mathias Lindstrom

If you would like to participate in the Working Group to review any of these TIPs, please write to tip@tappi.org.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)