Archive | Advertise | tappi.org January 2020

Print Print this article | Send to Colleague

The 2019/2020 Standards listed below are all due for review.  Due to the migration issues in 2019 and our plan to have a new balloting system in place this year, we do not have a set schedule as yet.  Once a clear timeframe has been established, we will update the list in the STAR Newsletter and on our website. 

If you wish to participate in the SSIGs that will review these Standards or if you would like to request a copy of the drafts in ballot, please send your request to TAPPI at standards@tappi.org.

Thank you for your patience and support while we diligently work through and resolve the migration issues.  We look forward to bringing you an improved balloting experience in the future! 

Standard #  Title 
T 200 sp-15  Laboratory beating of pulp (Valley beater method)
T 203 cm-09  Alpha-, beta- and gamma-cellulose in pulp
T 211 om-16  Ash in wood, pulp, paper and paperboard: combustion at 525 degrees C
T 213 om-15 Dirt in pulp - chart method
T 220 sp-16  Physical testing of pulp handsheets
T 222 om-15  Acid insoluble lignin in wood and pulp
T 223 cm-10  Pentosans in wood and pulp
T 226 cm-11  Specific external surface of pulp
T 235 cm-09  Alkali solubility of pulp at 25°C
T 236 om-13  Kappa number of pulp
T 244 cm-11 Acid-insoluble ash in wood, pulp, paper, and paperboard
T 248 sp-15  Laboratory beating of pulp (PFI mill method)
T 252 om-16 pH and electrical conductivity of hot water extracts of pulp, paper, and paperboard
T 254 cm-10  Cupriethylenediamine disperse viscosity of pulp (falling ball method)
T 257 sp-14  Sampling and preparing wood for analysis
T 258 om-16  Basic density and moisture content of pulpwood
T 259 om-15  Species identification of nonwood plant fibers
T 261 cm-10  Fines fraction by weight of paper stock by wet screening
T 263 sp-16  Identification of wood and fibers from conifers
T 272 sp-12 Forming handsheets for reflectance testing of pulp (sheet machine procedure)
T 277 sp-14  Macro stickies content in pulp: the “pick-up”
T 401 om-15 Fiber analysis of paper and paperboard
T 403 om-15  Bursting strength of paper
T 409 sp-15  Machine direction of paper and paperboard
T 411 om-15  Thickness (caliper) of paper, paperboard, and combined board
T 412 om-16 Moisture in pulp, paper, and paperboard
T 425 om-16 Opacity of paper (15/d geometry, illuminant A/2 degrees, 89% reflectance backing and paper backing)
T 429 cm-10  Alpha-cellulose in paper
T 431 cm-10  Ink absorbency of blotting paper
T 434 cm-10 Acid-soluble iron in paper
T 435 om-16 Hydrogen ion concentration (pH) of paper extracts (hot extraction method)
T 437 om-12 Dirt in paper and paperboard
T 438 cm-06 Zinc and cadmium in paper
T 454 om-15 Turpentine test for voids in glassine and greaseproof papers
T 456 om-15  Tensile breaking strength of water-saturated paper and paperboard (“wet tensile strength")
T 460 om-16  Air resistance of paper (Gurley method)
T 462 cm-16  Castor-oil penetration test for paper
T 465 sp-16  Static creasing of paper for water vapor transmission tests
T 476 om-16  Abrasion loss of paper and paperboard (Taber-type method)
T 480 om-15  Specular gloss of paper and paperboard at 75 degrees
T 489 om-15  Bending resistance (stiffness) of paper and paperboard (Taber-type tester in basic configuration)
T 493 cm-10  Identification and determination of melamine resin in paper
T 502 cm-07 Equilibrium relative humidity of paper and paperboard
T 504 cm-07  Glue in paper (qualitative & quantitative determination)
T 509 om-15  Hydrogen ion concentration (pH) of paper extracts (cold extraction method)
T 512  sp-12 Creasing of flexible packaging material paper specimens for testing
T 516 cm-11  Envelope seal, seam, and window patch testing
T 534 om-15  Brightness of clay and other mineral pigments (d/0 diffuse)
T 537 om-16  Dirt count in paper and paperboard (optical character recognition - OCR)
T 538 om-16  Roughness of paper and paperboard (Sheffield method)
T 541 om-15  Internal bond strength of paperboard (z-direction tensile)
T 543 om-16 Bending resistance of paper (Gurley-type tester)
T 546 om-15  Machine-direction grammage variation measurement (gravimetric method)
T 550 om-13 Determination of equilibrium moisture in pulp, paper and paperboard for chemical analysis
T 553 om-15  Alkalinity of paper as calcium carbonate (alkaline reserve of paper)
T 555 om-15 Roughness of paper and paperboard (print-surf method)
T 556 om-16  Bending resistance of paper and paperboard by single-point bending methods
T 558 om-15  Surface wettability and absorbency of sheeted materials using an automated contact angle tester)
T 563 om-15 Equivalent black area (EBA) and count of visible dirt in pulp, paper and paperboard by image analysis
T 564 sp-16  Transparent chart for the estimation of defect size
T 566 om-15  Bending resistance (stiffness) of paper (Taber-type tester in 0 to 1 Taber stiffness unit configuration)
T 567 om-15  Determination of effective residual ink concentration (ERIC) by infrared reflectance measurement
T 573 sp-15  Accelerated temperature aging of printing and writing paper by dry oven exposure apparatus
T 578 sp-16  Accelerated light aging of printing and writing paper by xenon-arc exposure apparatus
T 580 pm-12  Thickness (caliper) of towel, tissue, napkin and facial products
T 600 om-15 Analysis of formaldehyde in aqueous solutions and of free formaldehyde in resins
T 602 cm-06  Analysis of sulfuric acid
T 610 sp-15  Preparation of indicators and standard solutions
T 613 cm-10  Analysis of caustic soda
T 617 cm-10  Analysis of lime
T 618 cm-10  Analysis of limestone
T 619 cm-10  Analysis of salt cake
T 621 cm-10  Analysis of rosin
T 622 cm-10  Analysis of sodium hydrosulfite
T 624 cm-11  Analysis of soda and sulfate white and green liquors
T 628 cm-10 Analysis of rosin size
T 631 om-16 Microbiological enumeration of process water and slush pulp
T 632 cm-11 Analysis of sodium silicate
T 646 om-11  Brightness of clay and other mineral pigments (45/0)
T 650 om-15 Solids content of black liquor
T 656 cm-07  Measuring, sampling, and analyzing white waters
T 657 sp-12  Sampling of fillers and pigments
T 684 om-15  Gross heating value of black liquor
T 803 cm-10  Puncture test of containerboard
T 807 om-16  Bursting strength of linerboard
T 822 om-16  Ring crush of paperboard (rigid support method)
T 826 om-13  Short span compressive strength of containerboard
T 829 om-15 Score quality test
T 835 om-14 Water absorption of corrugating medium: water drop absorption test
T 836 om-13  Bending stiffness, four point method
T 844 pm-15  Determining construction (nominal basis weight) of corrugated board
T 1006 sp-15 Testing of fiber glass mats:  use of modified TAPPI procedures for sampling and lot acceptance, stiffness, tear resistance, air permeability, and thickness
T 1007 sp-15 Sample location for fiber glass mat sheets
T 1008 sp-15 Test conditions for fiberglass mat test methods
T 1009 om-16 Tensile strength and elongation at break for fiber glass mats
T 1011 om-15 Basis weight of fiber glass mats
T 1012 om-15 Moisture content of fiber glass mats
T 1013 om-15 Loss on ignition of fiber glass mats
T 1014 om-15 Moisture sensitivity of fiber glass mats
T 1015 sp-15 Fiber glass mat uniformity (visual defects)
T 1016 om-15 Average fiber diameter of fiber glass mats
T 1215 sp-12 The determination of instrumental color difference

 

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)