Archive | Advertise | tappi.org January 2020

Print Print this article | Send to Colleague

The below Standards were approved for publication at the last SARG meeting on October 2, 2019 and have now been published.

T 240 om-19 Consistency (concentration) of pulp suspensions (Revised)

T 453 sp-19 Effect of dry heat on properties of paper and board (Reaffirmed)

T 527 om-19 Color of paper and paperboard (d/0, C/2) (Reaffirmed)

T 544 cm-19 Aging of paper and board with moist heat (Reaffirmed)

T 545 om-19 Cross-machine grammage profile measurement (gravimetric method) (Revised)

T 1200 sp-19 Interlaboratory evaluation of test methods to determine TAPPI repeatability and reproducibility (Reaffirmed)

T 1211 sp-19 Self-certification practice for organizations providing reference materials for TAPPI Standards (Revised)

The following TIPs have been withdrawn by the recommendation of the Working Group Chair:

TIP 0304-20 Calibration of flexible beam crush tester  WGC: Mike Jackson

TIP 0304-42 Go/no go gauge devices for the boxplant  WGC: Tom Allen

TIP 0305-07 Purchase order  WGC: Steve Schmidt

TIP 0305-26 Introduction to the flow chart  WGC: Steve Schmidt

TIP 0305-44 Counter ejector section  WGC: John Semenske

TIP 0306-16 Guideline for direct contact printing bar code symbols on corrugated has been withdrawn due to outdated information. A current version is available for purchase through the Fibre Box Association bookstore (FBA) at https://fibrebox.myshopify.com/collections/store-products

The following TIPs were withdrawn as they will be re-issued as Useful Methods (UM).

TIP 0304-19 Curtain coating weight test WGC: Mike Jackson

TIP 0304-33 Proper methods of measuring starch adhesive viscosity WGC: Peter Snyder 

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)