Archive | Advertise | tappi.org February 2019

Print Print this article | Send to Colleague


Volunteers to chair the following working groups of Technical Information Papers (TIPs) are needed.
All Working Groups of TIPs require a minimum of 3 TAPPI members from 3 different companies in order to review a TIP. The following TIPs do not have an assigned Working Group Chair (WGC) to initiate the review:

WGC needed
0304-20 Calibration of flexible beam crush tester
0304-23 Statistical process control pin adhesion
0304-24 Calibration and maintenance of the burst tester
0304-42 Go/no go gauge devices for the boxplant
0304-37 How to prevent score cracking in a box plant
0304-42 Go/no go gauge devices for the boxplant
0304-46 Techniques for running "WRA" (water resistant starch adhesive)
0304-60 A procedure to proof a flexo printing ink
 
0304-72 Critical properties to consider when unitizing
0305-06 Machinery considerations and selection
0305-23 Rotary cutting die maintenance
0305-32 Housekeeping at order and shift change and weekly
0305-34 Daily, weekly, and monthly maintenance press checklists
0305-35 Rotary diecutter urethane anvil maintenance
0305-38 Troubleshooting the printing section
0305-43 Extruded glue mechanism supplement
0305-49 Checklist: preparing diecuts for shipment
0305-54 Material handling considerations for flexo folder gluers
0306-06 Drying and curing techniques for in-line flexographic printing
0404-04 Recommended tensions in dryer fabrics
0404-50 Paper machine room ventilation guidelines
0404-64 Press fabric guiding
0410-05 Head of stock behind slice (head/jet and slice flow rate relationships)
0410-08 Control of stock jump on a fourdrinier wire
0410-10 Weirs and flumes
0410-14 Generalized method for determining the pipe friction loss of flowing pulp suspensions
0410-15 Optimum consistency for pumping pulp
0603-02 Stickies definition and classification
1205-02 Cotton in nonwovens
 
If you would like to join a Working Group of a TIP, please write to tip@tappi.org for more information.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)