Archive | Advertise | tappi.org December 2018

Print Print this article | Send to Colleague

 

Listed below are TAPPI TIPs that were recently submitted to the Working Group for review. The date when the Work Item was opened is shown for each TIP, as well as the Subject Category under which the TIP is assigned and the Working Group Chair's (WGC) name. The target completion date for the review of each TIP is one year after the opening of the Work Item.  
 

0106 - Coating Pigments
11/21/18 TIP 0106-06 Kaolin clay pigment index. WGC: Prakash B. Malla

0404 - Water Removal
11/28/18 TIP 0404-24 Guidelines for the design, operation, performance evaluation, and troubleshooting of a paper machine hood and air systems. WGC: Mark Harrison
12/9/18 TIP 0404-46 Techniques for nip impressions. WGC: Gary Nyman

0416 - Steam & Power / Energy Management
11/29/18 TIP 0416-09 Collection and burning of concentrated noncondensible gases: regulations, design, and operation. WGC: Ben Bunner

If you would like to participate in the Working Group to review any of these TIPs, please write to tip@tappi.org.

 

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)