Archive | Advertise | tappi.org November 2018

Print Print this article | Send to Colleague


Listed below are TAPPI TIPs that were recently submitted to the Working Group for review. The date when the Work Item was opened is shown for each TIP, as well as the Subject Category under which the TIP is assigned and the Working Group Chair's (WGC) name. The target completion date for the review of each TIP is one year after the opening of the Work Item.  

0416 - Steam & Power/Energy Management
10/19/18 TIP 0416-20 Recovery boiler sootblowers: practical guidelines. WGC: Danny S. Tandra

0420 - Maintenance & Mechanical Engineering
10/19/18 TIP 0420-12 Guidelines for evaluation of liquid ring vacuum pump performance. WGC: Robert Matzka

0425 - Yankee Dryer Safety and Reliability
9/8/17 TIP 0425-01 Guidelines for routine periodic inspection and testing of cast iron Yankee and MG dryers. WGC: Clive Butler

If you would like to participate in the Working Group to review any of these TIPs, please write to tip@tappi.org. 

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)