Archive | Advertise | tappi.org STAR - SARG edition Experts needed for "Zinc and Cadmium in paper" review - October 2015

Print Print this article | Send to Colleague

The following standards have been reviewed, revised, updated, and are awaiting final approval at the SARG meeting on October 20, 2015:

T 1013 om-15 "Loss on ignition of fiber glass mats"

T 1016 om-15 "Average fiber diameter of fiber glass mats"

T 267 cm-15 "Compression wood identification in pulpwood"

T 541 om-15 "Internal bond strength of paperboard (z-direction tensile)"

T 489 om-15 "Bending resistance (stiffness) of paper and paperboard (Taber-type tester in basic configuration)"

T 411 om-15 "Thickness (caliper) of paper, paperboard, and combined board"

T 1006 sp-15 "Testing of fiber glass mats:  use of modified TAPPI procedures for sampling and lot acceptance, stiffness, tear resistance, air permeability, and thickness"

T 456 om-15 "Tensile breaking strength of water-saturated paper and paperboard ("wet tensile strength")

T 808 cm-15 "Flat crush test of corrugated board (flexible beam method)"

T 553 om-15 "Alkalinity of paper as calcium carbonate (alkaline reserve of paper)"

T 566 om-15 "Bending resistance (stiffness) of paper (Taber-type tester in 0 to 10 Taber stiffness unit configuration)"

T 844 om-15 (upgrade from OM) "Determining construction (nominal basis weight) of corrugated board"

T 1011 om-15 "Basis weight of fiber glass mats"

T 829 om-15 "Score quality test"

T 684 om-15 "Gross heating value of black liquor"

T 610 sp-15 "Preparation of indicators and standard solutions"

T 222 om-15 "Acid insoluble lignin in wood and pulp"

T 600 om-15 "Analysis of formaldehyde in aqueous solutions and of free formaldehyde in resins"

T 1014 om-15 "Moisture sensitivity of fiber glass mats"

T 509 om-15 "Hydrogen ion concentration (pH) of paper extracts (cold extraction method)"

T 403 om-15 "Bursting strength of paper"

T 567 om-15 "Determination of effective residual ink concentration (ERIC) by infrared reflectance measurement"

T 233 cm-06 "Fiber length of pulp by classification"

T 480 om-15 "Specular gloss of paper and paperboard at 75 degrees"

T 534 om-15 "Brightness of clay and other mineral pigments (d/0 diffuse)"

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)