Print this article | Send to Colleague

The system for review and development of TAPPI Standards requires an announcement of review dates so that any interested TAPPI parties may access the drafts, submit comments, and/or join the Standard-Specific Interest Group (SSIG) to cast an official vote.

Listed below are the Standards that will be up for review in 2015. The date indicated is the target date on which the draft will be distributed to the Standard-Specific Interest Group (SSIG) for that particular Standard.

Any interested individuals who wish to be part of the voting for any Standard should send a message to standards@tappi.org and request voting membership on the corresponding SSIG, prior to the target ballot date, if possible. Anyone who joins the SSIG before the target balloting date will receive a notice of the ballot.

If you have joined the Standard Specific Interest Group for any Standard, you will receive a notice for ballot at the proper time with instructions for casting your vote and making your comments. If you wish to join the Standard Specific Interest Group for a particular Standard, please go to the Subject Categories for Standards  page or contact the Standards Department at TAPPI (standards@tappi.org), or phone +1-770-209-7276 or fax +1-770-446-6947).

T 233 cm-06 "Fiber length of pulp by classification" (May 1, 2015)

T 800 cm-06 "Drum test for fiberboard shipping containers (revolving hexagonal drum)" (May 5, 2015)

T 684 om-11 "Gross heating value of black liquor" (May 12, 2015)

T 1011 om-11 "Basis weight of fiber glass mats" (May 15, 2015)

T 600 om-11 "Analysis of formaldehyde in aqueous solutions and of free formaldehyde in resins" (May 19, 2015)

T 509 om-11 "Hydrogen ion concentration (pH) of paper extracts (cold extraction method)" (June 5, 2015)

T 435 om-11 "Hydrogen ion concentration (pH) of paper extracts (hot extraction method)" (June 9, 2015)

T 610 sp-11 "Preparation of indicators and standard solutions" (June 16, 2015)

T 222 om-11 "Acid insoluble lignin in wood and pulp" (June 19, 2015)

T 266 om-11 "Determination of sodium, calcium, copper, iron, and manganese in pulp and paper by atomic absorption spectroscopy" (June 23, 2015)

T 413 om-11 "Ash in wood, pulp, paper and paperboard:  combustion at 900 degrees C" (June 30, 2015)

T 419 om-11 "Starch in paper" (July 14, 2015)

T 830 om-11 "Ink rub test of containerboard and corrugated board"  (July 17, 2015)

T 564 sp-11 "Transparent chart for the estimation of defect size" (July 21, 2015)

T 810 om-11 "Bursting strength of corrugated board" (July 28, 2015)
 
T 1211 sp-11 "Acceptance procedures for laboratories providing reference materials for TAPPI Standards" (July 31, 2015)

T 460 om-11 "Air resistance of paper (Gurley method)" (August 4, 2015)

T 218 sp-11 "Forming handsheets for reflectance testing of pulp (Buchner funnel procedure)" (August 7, 2015)

T 646 om-11 "Brightness of clay and other mineral pigments (45/0)" (August 11, 2015)

T 462 cm-06 "Castor-oil penetration test for paper" (August 14, 2015)

T 602 cm-06 "Analysis of sulfuric acid" (August 18, 2015)

T 807 om-11 "Bursting strength of linerboard" (August 25, 2015)

T 827 om-11" Box blank dimensioning" (September 1, 2015)

T 400 sp-11 "Sampling and accepting a single lot of paper, paperboard, containerboard, or related product" (September 11, 2015)

T 263 sp-11 "Identification of wood and fibers from conifers" (September 15, 2015)

T 258 om-11 "Basic density and moisture content of pulpwood" (September 18, 2015)

T 545 om-11 "Cross-machine grammage profile measurement (gravimetric method)" (September 22, 2015)

T 537 om-11 "Dirt count in paper and paperboard (optical character recognition - OCR)" (September 25, 2015)

T 438 cm-06 "Zinc and cadmium in paper" (October 6, 2015)

T 809 om-11 "Flat crush of corrugating medium (CMT test)" (October 9, 2015)

T 543 om-11 "Bending resistance of paper (Gurley-type tester)" (October 13, 2015)

T 822 om-11 "Ring crush of paperboard (rigid support method)" (October 20, 2015)

T 425 om-11 "Opacity of paper (15/d geometry, illuminant A/2 degrees, 89% reflectance backing and paper backing)" (October 23, 2015)

T 519 om-11 "Diffuse opacity of paper (d/0 paper backing)" (November 3, 2015)

T 1501 sg-11 "Training standard for paper machine tender" (November 10, 2015)

T 556 om-11 "Bending resistance of paper and paperboard by single-point bending methods" (November 13, 2015)

T 811 om-11 "Edgewise compressive strength of corrugated fiberboard (short column test)" (November 17, 2015)

T 476 om-11 "Abrasion loss of paper and paperboard (Taber-type method)" (December 1, 2015)

T 578 sp-11 "Accelerated light aging of printing and writing paper by xenon-arc exposure apparatus" (December 4, 2015)

T 412 om-11 "Moisture in pulp, paper, and paperboard" (December 8, 2015)

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)