Archive | Advertise | tappi.org May 2014

Print Print this article | Send to Colleague

TIP 0404-05 "Methods of evaluating high velocity dryers" (Revision)

TIP 0404-19 "Press section monitoring" (Revision)

TIP 0416-09 "Collection and burning of concentrated non-condensible gases: regulations, design and operation" (Revision)

T 257 "Sampling and preparing wood for analysis" (Revision)

T 277 "Macro stickies content in pulp: the "pick-up" method" (Reclassification as Standard Practice)

T 455 "Identification of wire side of paper" (Reaffirmation)

T 515 "Visual grading and color matching of paper" (Revision)

T 529 "Surface pH measurement of paper" (Revision)

T 569 "Internal bond strength (Scott type)" (Revision)

T 625 "Analysis of soda and sulfate black liquor" (Reinstatementof a withdrawn standard, revised and reclassified as a Classical Method)

T 648 "Viscosity of coating clay slurry" (Reaffirmation)

T 824 "Fluted edge crush of corrugating medium (flexible beam method)" (Revision)

T 825 "Flat crush test of corrugated board (rigid support method)" (Revision)

T 831 "Water absorption of corrugating medium: water drop penetration test" (Revision)

T 843 "Fluted edge crush of corrugating medium (rigid support method)" (Revision)

T 1200 "Interlaboratory evaluation of test methods to determine TAPPI repeatability and reproducibility" (Revision)

T 1205 "Dealing with suspect (outlying) test determinations" (Revision)

Special note:  Documents appearing in the TAPPI online version of the Standards and TIPs are updated once a month (usually around the 15th). So it is possible that there is a delay between the publication announcement and the posting online. If you are a subscriber to the online access to Standards and TIPs and you are in a hurry for new documents that have not yet been posted, you can send a request to standards@tappi.org.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)