Print this article | Send to Colleague

T 210 cm-13 "Sampling and testing wood pulp shipments for moisture" (Revision)

T 236 om-13 "Kappa number of pulp" (Revision)

T 459 om-13 "Surface strength of paper (wax pick test)" (Revision)

T 494 om-13 "Tensile properties of paper and paperboard (using constant rate of elongation apparatus)" (Revision)

T 511 om-13 "Folding endurance of paper (MIT tester)" (Revision)

T 524 om-13 "Color of paper and paperboard (45/0, C/2)" (Revision)

T 527 om-13 "Color of paper and paperboard (d/0, C/2)" (Revision)

T 577 om-13 "Score bend test" (Revision)

T 808 om-13 "Flat crush test of corrugated board (flexible beam method)" (Revision)

T 812 om-13 "Ply separation of solid and corrugated fiberboard (wet)" (Revision)

T 836 om-13 "Bending stiffness, four point method" (Revision)

TIP 0305-30 "The need for planned maintenance" (Revision)

TIP 0404-17 "Recommended minimum dryer pocket air requirements" (Revision)

TIP 0404-18 "Measurement of dryer condensing rates (vertical separator method)" (Revision)

TIP 0404-21 "Press fabric record book" (Revision)

TIP 0404-22 "Press section economic evaluation" (Revision)

TIP 0404-27 "Press fabric dewatering and conditioning - suction box (Uhle box) design and vacuum requirements" (Revision)

TIP 0404-36 "Paper grade classifications" (Revision)

TIP 0404-41 "Granite roll material and surface requirements" (Revision)

TIP 0404-43 "Water permeability of press fabrics" (Revision)

TIP 0404-51 "Paper machine clothing cleaning and conditioning for recycled fiber use" (Revision)

TIP 0425-02 "Inspection guidelines for yankee hood systems" (New)

TIP 0416-13 "Water treatment-related opportunities for energy conservation in a paper mill powerhouse" (Revision)

TIP 0606-23 "Bleach plant washer efficiency guide" (Revision)

Special note:  Documents appearing in the TAPPI online version of the Standards and TIPs are updated once a month (usually around the 15th). So it is possible that there is a delay between the publication announcement and the posting online. If you are a subscriber to the online access to Standards and TIPs and you are in a hurry for new documents that have not yet been posted, you can send a request to standards@tappi.org.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)