Archive | Advertise | tappi.org November 2012

Print Print this article | Send to Colleague


T 205 sp-12 "Forming handsheets for physical tests of pulp" (Revision)

T 234 cm-12 "Coarseness of pulp fibers" (Revision)

T 257 sp-12 "Sampling and preparing wood for analysis" (Revision and reclassification as a Standard Practice)

T 262 sp-12 "Preparation of mechanical pulps for testing" (Revision)

T 271 om-12 "Fiber length of pulp and paper by automated optical analyzer using polarized light" Revision)

T 272 sp-12 "Forming handsheets for reflectance testing of pulp (sheet machine procedure)" (Revision)

T 414 om-12 "Internal tearing resistance of paper (Elmendorf-type method)" (Revision)

T 437 cm-12 "Dirt in paper and paperboard" (Revision)

T 483 cm-12 "Odor of packaging materials" (Revision)

T 512 sp-12 "Creasing of flexible packaging material paper specimens for testing" (Revision)

T 551 om-12 "Thickness of paper and paperboard (soft platen method) " (Revision)

T 563 om-12 "Equivalent black area (EBA) and count of visible dirt in pulp, paper and paperboard by image analysis" (Revision)

T 580 pm-12 "Thickness (caliper) of towel, tissue, napkin and facial products" (New Provisional Method)

T 657 sp-12 "Sampling of fillers and pigments" (Revision)

T 665 cm-12 "Analysis of talc" (Revision)

T 697 cm-12 "Accelerated test for viscosity stability of clay slurries" (Revision)

T 804 om-12 "Compression test of fiberboard shipping containers" (Revision)

T 834 om-12 "Determination of containerboard roll hardness" (Revision)

T 839 om-12 "Edgewise compressive strength of corrugated fiberboard using the clamp method (short column test)" (Revision)

T 1500 gl-12 "Optical measurements terminology (related to appearance evaluation of paper)" (Revision)

TIP 0606-30 "Chlorine dioxide (ClO2) safe storage and handling" (Revision)

TIP 0306-18 "Cleaning anilox rolls: procedures and options" (Revision)

Special note: Documents appearing in the TAPPI online version of the Standards and TIPs are updated once a month (usually around the 15th). So it is possible that there is a delay between the publication announcement and the posting online. If you are a subscriber to the online access to Standards and TIPs and you are in a hurry for new documents that have not yet been posted, you can send a request to standards@tappi.org.

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)