Print this article | Send to Colleague

The following standards are up for review in 2011. Please see the separate article on the Standards and TIPs Kickoff Meeting to be held in May 2011 at Paper Con.

T 808 om-07 Flat crush test of corrugated board (flexible beam method) (May 10, 2011)
T 811 om-07 Edgewise compressive strength of corrugated fiberboard (short column test) (May 17, 2011)
T 822 om-07 Ring crush of paperboard (rigid support method) (June 7, 2011)
T 449 om-07 Bacteriological examination of paper and paperboard (June 10, 2011)
T 281 sp-07 Open drum washer mat sampling technique (June 14, 2011)
T 252 om-07 pH and electrical conductivity of hot water extracts of pulp, paper, and paperboard (June 17, 2011)
T 211 om-07 Ash in wood, pulp, paper and paperboard: combustion at 525°C (June 21, 2011)
T 1212 sp-07 Light sources for evaluating papers including those containing fluorescent whitening agents (June 24, 2011)
T 1214 sp-07 Interrelation of reflectance, R₀; reflectivity, R ; TAPPI opacity, C_0.89; scattering, s; and absorption, k (June 28, 2011)
T 1217 sp-07 Photometric linearity of optical properties instruments (July 8, 2011)
T 1218 sp-07 Calibration of reflectance standards for hemispherical geometry (July 12, 2011)
T 575 om-07 Roughness of paper and paperboard,stylus (Emveco-type) method (July 15, 2011)
T 530 om-07 Size test for paper by ink resistance (Hercules-type method) (July 19, 2011)
T 512 sp-07 Creasing of flexible packaging material paper specimens for testing (July 22, 2011)
T 547 om-07 Air permeance of paper and paperboard (Sheffield method) (July 26, 2011)
T 277 om-07 Macro stickies content in pulp: the "pick-up" method (July 29, 2011)
T 240 om-07 Consistency (concentration) of pulp suspensions (August 2, 2011)
T 212 om-07 One percent sodium hydroxide solubility of wood and pulp (August 5, 2011)
T 559 cm-02 Grease resistance test for paper and paperboard (August 9, 2011)
T 665 cm-02 Analysis of talc (August 12, 2011)
T 483 cm-02 Odor of packaging materials (August 16, 2011)
T 433 cm-02 Water resistance of sized paper and paperboard (dry indicater method) (August 19, 2011)
T 234 cm-02 Coarseness of pulp fibers (August 23, 2011)
T 257 cm-02 Sampling and preparing wood for analysis (August 26, 2011)
T 552 om-07 Determination of wetting tension of polyolefin films and coated surfaces via the mayer rod technique (August 30, 2011)
T 802 om-07 Drop test for fiberboard shipping containers (September 2, 2011)
T 815 om-07 Coefficient of static friction (slide angle) of packaging and packaging materials (including shipping sack papers, corrugated and solid fiberboard) (inclined plane method) (September 9, 2011)
T 834 om-07 Determination of containerboard roll hardness (September 13, 2011)
T 832 om-07 Water absorption of corrugating medium: float curl method (September 16, 2011)
T 838 om-07 Edge crush test using neckdown (September 20, 2011)
T 1200 sp-07 Interlaboratory evaluation of test methods to determine TAPPI repeatability and reproducibility (September 23, 2011)
T 527 om-07 Color of paper and paperboard (d/0, C/2) (October 7, 2011)
T 524 om-07 Color of paper and paperboard (45/0, C/2) (October 11, 2011)
T 1219 sp-07 Storage of paper samples for optical measurements and color matching (October 14, 2011) T 653 om-07 Specular gloss of paper and paperboard at 20° (October 18, 2011)
T 1215 sp-07 The determination of instrumental color differences (October 21, 2011)
T 1216 sp-07 Indices for whiteness, yellowness, brightness, and luminous reflectance factor (October 25, 2011)
T 536 om-07 Resistance of paper to passage of air (high-pressure Gurley method) (November 8, 2011)
T 568 om-07 Physical area of sub-visible contraries in pulp, paper, and paperboard by image analysis (November 11, 2011)
T 275 sp-07 Screening of pulp (Somerville-type equipment) (November 18, 2011)
T 271 om-07 Fiber length of pulp and paper by automated optical analyzer using polarized light (December 2, 2011)
T 282 pm-07 Hexeneuronic acid content of chemical pulp (December 9, 2011)

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)