Archive | Advertise | tappi.org April 2010

Final Drafts Posted for SARG

Print Print this article | Send to Colleague


The following standards have been posted on the agenda for the next SARG meeting. These are ready for final approval. If you have comments on any of these standards, please send a message to standards@tappi.org no later than April 29, 2010.


T 456 "Wet tensile breaking strength of paper and paperboard"
T 254 "Cupriethylenediamine disperse viscosity of pulp (falling ball method)"
T 403 "Bursting strength of paper"
T 411 "Thickness (caliper) of paper, paperboard, and combined board"
T 617 "Analysis of lime"
T 553 "Alkalinity of paper as calcium carbonate (alkaline reserve of paper)"
T 562 "CIE whiteness and tint of paper and paperboard (45/0 geometry, C/2 illuminant/observer)"
T 840 "Testing adhesives used in glued lap joints of corrugated fiberboard containers"
T 702 "Rheological measurements for characterization of polyolefins: low-density polyethylene (LDPE) for extrusion coating"
T 431 "Ink absorbency of blotting paper
T 619 "Analysis of salt cake"

TAPPI Standards guidelines require that all TAPPI members receive notification of any proposed new Standard or TIPs. This message is being sent to you because you are a TAPPI member; have purchased TIPs or Standards products from TAPPI; or because you have previously expressed interest in this topic.

TAPPI

TAPPI is the leading technical association for the worldwide pulp, paper and converting industry.
15 Technology Parkway South | Norcross, GA 30092 | www.tappi.org
1-800-332-8686 (US) | 1-800-446-9431 (Canada) | +1-770-446-1400 (Worldwide)