On behalf of PAPTAC and Course Leader, Paul Stuart of EnVertis and Ecole Polytechnique, we are pleased to inform you of PAPTAC's first biorefinery course, to be held June 9-11 at the Sheraton Wall Center in Vancouver, ahead of the PACWEST conference.  We hope that you can join us!   

View the complete course brochure and registration
 
This PAPTAC biorefinery course will seek to provide the knowledge and tools for forest industry leaders, technology providers, and consultants to develop bioenergy strategies and better understand emerging bioenergy technologies and their design/implementation in a business strategy.

More specifically, the course is intended for corporate and mill leadership – including mill managers and senior technical staff – who wish to become more knowledgeable about biorefinery implementation strategy and design methods, and who seek to identify and select the best biorefinery strategy for their mills. A total of 19 expert instructors from across North America and Europe will share their experience during the three days, generally structured as follows:

Day 1: Advanced Biorefinery Fundamentals
Day 2: Setting Biorefinery Strategy
Day 3: Biorefinery Techno-Economics and Case Studies

The course format has been designed to encourage exchange between instructors and participants, and a copy of the newly-released book of "Integrated Biorefineries: Design, Analysis, and Optimization" will be included in the registration price. For your information, the same course will also be offered by TAPPI and co-sponsored by PAPTAC this September in Green Bay, Wis., USA. Learn more about that course.

We look forward to being in touch with you regarding this opportunity.

For information, contact Carmie Lato from PAPTAC at 514-392-6969

Back to top

 

TAPPI congratulates Kenneth Kildahl from the University of Minnesota and Aislinn Brackman from the State University of New York for winning the 2013 Outstanding Student Chapter Member Award. This is perhaps the most prestigious award TAPPI can offer to a student chapter member.

Ulrike Tschirner, faculty advisor at the University of Minnesota says that "due to Kenneth's influence, our student chapter is the most active we have had in years. He has recruited a large number of new members and initiated several activities such as fundraising through selling coffee mugs or handmade paper, and three large (and successful) grant applications. The grants were a group effort, but he clearly took the lead. Through these efforts, we were able to send 12 members to the TAPPI PIMA Student Summit this year.

Aislinn has worked as a senior marketing coordinator at King & King Architects in Syracuse while taking classes part time at Onondaga Community College. A co-worker suggested to her the papermaking program at SUNY-ESF. As she learned more about the program she was excited about the possibility of going into such a specialized field with excellent scholarships and almost guaranteed job placement after graduation.

Aislinn is involved in many organizations on campus. She is the outgoing president of the Undergraduate Student Association and treasurer of Papyrus Club, a member of the Empire Forester, ESF's yearbook, and AXS, ESF's honor society. Her scholarly activities allowed her to interact with many members of the campus' administration and faculty and serve as a representative of the PBE program. She also helped make the paper and bioprocess engineering program more visible to the student campus community, many who had no idea that Walters Hall even existed.

Back to top

 

The TAPPI Best Practices on the Corrugator Course, June 25-27 at the TAPPI Training Center in Peachtree Corners, Ga., USA.

Top 10 Reasons to Register for TAPPI's Best Practices on the Corrugator Course:

#10 Gain the knowledge you need to troubleshoot most operational problems.
#9 Learn how you can maintain quality while reaching maximum corrugator speeds.
#8 Network with peers to find solutions to your quality issues.
#7 See on-site videos of conditions producing defects and how they can be resolved.
#6 Learn from industry-renown instructors Tom Pearce, Pearce Corrugated Consulting; Dan Dyson, Vice President of Production for Avista Solutions International, Inc.; Jon Porter, Senior Instructor/Process Specialist, Fosber America; Robin A. Sommers, Engineering Manager, Donahue & Associates; and Peter Snyder, National Account Salesman, Harper/Love Adhesive.
 
#5 Bring your defects to the experts—and to your colleagues in the room—to get guidance on how to overcome your production problems.
#4 Find out how you can get the maximum yield of boxes from the paperboard consumed.
#3 Take home new ideas and operational methods to improve production.
#2 Analyze your mill's specific problems with course instructors and explore possible solutions.

And the Number 1 reason why you should register for the 2013 TAPPI Best Practices on the Corrugator Course is...

With all of these great reasons, how can you not afford to?

Last year's course sold out, so here's your chance to attend. If you work with a corrugator, this is your opportunity to learn how to:

What to Bring with You: Your questions and issues related to corrugator operations and samples of your defects.

What You'll Take Home: New ideas and operational methods to improve production.

Want to know more? Here's the Proposed Course Schedule.

Put June 25-27 on your calendar and register now to lock in your participation before seats fill.

Back to top

 

Gulf Coast Papermaking and Lime Kilns Program - June 6-7, 2013, Destin, Fla., USA
 
Two Separate Technical Programs: Papermaking and Lime Kilns

Paper Machine Energy Audit Workshop - Thursday, June 6, 1:00 p.m. - 5:00 p.m.

A half-day workshop based on the TAPPI TIP 0404-63, Paper Machine Energy Conservation, will be conducted by Dick Reese, who has completed energy evaluations on more than 125 paper and pulp machines in 56 mills producing all major grades. Energy scorecards are used to benchmark energy use and identify opportunities for improvement. The scorecards are available in English, Spanish, and French.

Energy evaluations have identified annual savings opportunities ranging from $100,000 to $10 million on single paper machines. Typically 25% of recommended savings can be realized without any capital expenditures. Several mills have reduced annual energy cost by more than $1 million by implementing recommendations from the energy evaluations.

This workshop, geared towards paper mill employees on the front lines – process engineers, operators, maintenance, supervisors, and superintendents, includes practical advice on what to look for from stock prep through winding. Suppliers will also benefit by knowing what key items the mills are looking for and how they may relate to the products and services they are bringing to the mill. 

Concurrent Technical Sessions - Friday, June 7

The Friday Technical Sessions will have two concurrent tracks:

1.  Paper Machine Optimization: Mixing, Pressing & Drying. Topics include: "Evolution of Paper Machine Performance Evaluations," "Press Pit Pump Project at International Paper's Courtland Mill," "Paper Machine Water System Performance Evaluation Techniques," and "Steam and Condensate System Overview/Steam and Condensate System Troubleshooting and Optimization," among others.
2.  Lime Kilns: Recausticizing, Kiln Ringing/Build-up Issues, and New Technology.

The Gulf Coast TAPPI annual meeting will be held following the technical programs on June 8. We encourage family and friends to enjoy opportunities in the area such as:

•    Golf tournament. Assemble foursome and engage in a 'best ball' format on Seascape's  beautiful links 
•     Tennis round robin
•     Pontoon boats. GCT sponsors a few pontoon boats for families to cruise Choctawhatchee Bay
•     Gulf fishing. If there's enough interest, fishermen and women will charter a boat for offshore trolling
•     The beach. There's always the beach for a low key, relaxing day with feet in the sand! 

We celebrate the day's winners Saturday afternoon with a reception around the pool at 4:00 p.m. There will also be 'door prizes' for the kids.
 
If you have any questions about Saturday's activities, please feel free to contact Tim Watson at +1.251.422.7696 or Fred Thompson at +1.318.547.6169.
 
Reservations at the Seascape Resort can be booked by contacting them and requesting the Gulf Coast TAPPI rates:
 
Seascape Gulf Beach & Tennis Resort
Phone: 1.800.874.9106
 
1 BR: $162-210
2 BR: $178-226
3 BR: $242-330
 
Plus one time cleaning fee ranging from $95-145 (depends on unit size)
Rental includes daily beach chairs and umbrella and discounts on most other activities including golf (-40%).

Back to top

 

TAPPISAFE is proud to be a sponsor of the Pulp and Paper Safety Association (PPSA) 70th Annual Safety and Health Conference - "The Human Element of Safety", June 9 -12, 2013 in Williamsburg, Va., USA.

Join speakers from MWV, Weyerhaeuser Company, Domtar, Safe Start, and International Paper, to hear the latest on how human behavior will proactively help prevent, detect and control events before they occur. The conference will feature updates from OSHA, member company case studies, and PPSA's popular legal update.

Join professionals from across the country to discuss the importance of safety and the human impact on safety.

Sponsorship opportunities are still available.

Register soon for the best rates. For more information  visit "The Human Element of Safety" website.

Back to top

 

Your registration in the next few days will be one of the few reaining seats open for the popular TAPPI Introduction to Wet End Chemistry Course taking place June 11-13, 2013 at the TAPPI Training Facility in metro Atlanta, Ga., USA.
 
"This course is ideal for engineers and other technical people who need a better understanding of wet end chemistry," notes Scott Springmier, Manager, Pulp and Paper for TAPPI. "The course not only covers the key technologies, chemical additives and terminology but it also delves into the use of papermaking additives to change paper properties, improve runnability and reduce costs."

The course is designed for anyone that is involved with wet end operations as well as anyone training staff working in this area. New engineers with a strong technical background but lacking papermaking process knowledge would also benefit. Instructors focus this 3-day interactive training on innovative wet end chemistry principals and the use of additives to change or create new paper products. Through case studies, break-out sessions and networking with others in the course, attendees will learn how to implement new technology to improve efficiency and product quality, reduce machine downtime and off-specification production, select and use of papermaking chemicals, and troubleshoot problems.

Topics covered include: basic water chemistry, fibers and fines, starch, dry and wet strength agents, alum chemistry, rosin sizing, synthetic sizes, dyes, fillers, retention systems and deposit and pitch control. The impact of recent regulatory developments and how changes in fiber quality are impacting wet end operations are also reviewed.

The three course instructors are respected experts in wet end chemistry. Martin A. Hubbe, Ph.D., is Professor, Department of Forest Biomaterials, North Carolina State University. He began his career with American Cyanamid before joining International Paper Company as a research associate and later principal scientist.  Larry Anker, Ph.D., is Sizing and Wet Strength Applications Group Leader for Ashland Hercules Water Technologies. He earned a B.S. in Chemistry, Mathematics and Physics from Washington and Lee University and Ph.D. in Chemistry at Penn State University. Przem Pruszynski, Ph.D., is Global Technical Specialist for Nalco. He holds an M.S. in Analytical Chemistry and Ph.D. in Physical Organic Chemistry from University of Poznan, Poland, where he taught for 12 years. He's authored nearly 100 papers, holds several patents and has taught numerous technical courses.

 View the workshop schedule to see the specific topics covered.

Back to top

 

John Bentley earned a bachelor of science degree in electrical engineering from Pennsylvania State University and continued his studies at the University of Pittsburgh. In 1952, he began his career as an Industry Engineer with Westinghouse Electric Corp. In 1984, he began working for Allen-Bradley/Stromberg as Principal Engineer. Then in 1991, he began working for ABB Industrial Systems as Principal Engineer, where he had responsibility for guiding ABB world-wide pulp and paper drives system application engineering until his retirement in 1996. During his career John was instrumental in introducing a number of innovative drive system "firsts" to the North American paper industry, including the first all-digital sectional drive control in 1981 and the first ac vector control for sectional paper machine drives in 1986.

Bentley was a TAPPI member since 1964, and was a continuous contributor to the paper machine and winder power requirements task groups for more than three decades. He was recipient of the Engineering Division's Award in 1981 and was named a TAPPI Fellow in 1986. Her served as secretary, program chairman, and chairman of the Electrical Engineering Committee. In 1982 he was a co-developer and instructor of the TAPPI Drives Seminar and later for the TAPPI Drives Short Course. A holder of numerous patents, Bentley was a member of the institute of Electrical and Electronic Engineers (IEEE). In 1979, he was the recipient of the IEEE Pulp and Paper Industry Meritorious Achievement Award.

Back to top

 

Northeast PIMA/TAPPI Annual Scholarship Tournament
Friday, June 14, 2013, at Fox Ridge Golf Club, Auburn, Maine, USA
Registration 6:30 a.m. to 7:45 a.m. – shotgun start 8:00 a.m. sharp.
All proceeds from this tournament support the Northeast PIMA/TAPPI Scholarship Fund. Register ASAP as spots fill quickly. We accept checks and all major credit cards.
 
We accept donated swag for prizes – interested donors please contact Mark Reed or Micki Meggison (contact info below).

Fee: $100 per player (Golf, Cart, BBQ, Prizes, Range, etc.)
Hole Sponsorship: $100
BBQ + hole sponsorship: $200 (additional recognition & signage at BBQ)
Entry deadline: June 7, 2013
 
THREE WAYS TO ENTER:

Online Entry:
Registration Form

Mail team player names (or company name with hole and/or BBQ sponsorship choice) and check to:

Micki Meggison
Sappi Fine Paper NA
P.O. Box 5000
Westbrook, ME 04098

Or...

Fax team player names (or company name with hole and/or BBQ sponsorship) and payment information to:
Attn: Tanya Hickson, c/o NE PIMA Local Section Golf Tournament, Secure Fax: 240.396.5973
 
Do not email credit card numbers.

Questions or Concerns:
Micki Meggison
Phone: 207.671.2813

Or...

Mark Reed
Phone: 207.838.9099 

All checks payable to Northeast PIMA/TAPPI. If using credit card, register online or fax information to the secure number above – do not email. Online and faxed entries will generate electronic receipt emailed to cardholder. Receipts for mailed entries are available at the golf course during registration.

Back to top

 

The existence of cellulose nanocrystals and cellulose nanofibrils has been known for several decades, yet recent advances in science, particularly in the field of nanotechnology, have revealed that these materials contain unique physical properties, particularly high strength properties. Researchers have been studying how these materials can improve paper properties and will present their latest finding this June 24-27 in Stockholm, Sweden, at TAPPI's 8th Annual International Conference on Nanotechnology for Renewable Materials at the KTH Royal Institute of Stockholm.

The program for this year's event has been released, and one session will focus on using cellulose nanofibers for improving retention and increasing strength in paper. Researchers from Aalto University in Finland will report on improved flocculation of both precipitated calcium carbonate (PCC) and kaolin with the addition of certain cellulose nanomaterials. Researchers from Papiertechnische Stiftung (PTS) in Heidenau, Germany, will report on the importance of adding fillers, celluloses, and compounding agents in the right order to achieve the best results. Researchers from VTT in Finland will report on ways to increase the strength of paper by using filler particles coated with nanoscale calcium silicate hydrate (CS) structures. 

New reports at the conference will present some exciting advances for both within the pulp and paper industry and beyond. The technical program features cellulose nanomaterials in a variety of applications, including:

• Unique and Thin-Film Composites
• Filler and Coating Applications for Different Paper Grades
• Improved Barrier Properties for Packaging Applications
• Cellulose Nanomaterials as Films and Carriers in Medical Applications
• Nanopaper and Iridescent Colored Cellulose Films.

With more than 80 technical presentations, five keynote presentations, and 50 poster presentations, this year's conference is packed with the latest applications of renewable nanomaterials.

Watch for additional updates from TAPPI on how nanotechnology, and cellulose nanomaterials in particular, can be a transformative technology for the pulp and paper industry.

The 8th Annual International Conference on Nanotechnolgy for Renewable Materials is hosted by TAPPI's International Nanotechnology Division, which strives to collectively advance the responsible and sustainable production and use of renewable nanomaterials. More information is available online.

Back to top

 

Paper Machine Wet Press Manual, Fourth Edition
Edited by: Richard A. Reese

Paper Machine Wet Press Manual provides an introduction to wet pressing technology in the paper industry and includes information on practical press section considerations on paper machines. The book provides an overview of press section equipment and key factors in optimizing press section performance. In addition, checklists are included to evaluate press section performance.

The book will be particularly useful to paper company personnel including paper machine superintendents, foremen, paper machine operators, process engineers, etc. Employees of suppliers to the paper industry involved in supplying press section equipment and evaluating press section performance will also find the book beneficial. The Paper Machine Wet Press Manual, Fourth Edition is a project of the Water Removal Committee of TAPPI's Engineering Division.

Item Number: 0102B042 • List Price: $124 • Tappi Member: $83
                  
Starch and Starch Products for Wet End Application
By: Hans W. Maurer

Starch and Starch Products for Wet End Applications is a complement to Maurer's previous book, Starch and Starch Products in Surface Sizing and Paper Coating. His new book, Starch and Starch Products for Wet End Application, addresses issues in the preparation and application of starch and starch products for use in the wet stages of the papermaking process. This publication covers a wide range of subjects in starch utilization, ranging from the preparation of specific starch products to their use in papermaking for flocculation, retention, drainage, strength, and sizing control. Environmental issues in the use of starch and analytical procedures for starch analysis and charge characterization are also addressed.

Item Number: 0101R319 • List Price: $185 • Tappi Member: $125
       
    E-BOOKS COMING SOON
      
Roll and Web Defect Terminology - E-Book
By: Jerome M. Gess and Paul H. Wilson

This book takes the reader through the process of making paper, pointing out where interruptions can occur and where elements that are added to the system can cause problems in that part or subsequent parts of the papermaking process. The aim of this book is to give papermakers and those involved in the papermaking process the information required to allow them to understand how to track down and solve problems at their source rather than where the problems surface.

Paper Machine Quality Control Systems - Volume 1: Measurement Systems and Product Variability - E-Book
By: Quality Control Systems Education Common Interest Group of the Process Control Division

This book describes in detail the measurement technology used in Quality Controls Systems (QCS). Individual chapters are devoted to the five most prevalent QCS measurements (basis weight, moisture, caliper, ash, and color) in the paper industry. Each of these chapters covers the physical principles involved in each measurement, sensor designs, various methods of implementation, and influence factors. A somewhat lighter coverage is given to 10 other QCS measurements that do not have such a broad installation base. Common issues that impact all sensors are explained, including how sensor performance is measured and reported, the impact of scanning processes, filtering, scanner designs and construction, and sensor calibration and correlation. Statistical methods are covered in depth from discrete one-dimensional variability to multi-dimensional variability. Guidance is provided for using these statistical methods to locate the sources of variability in the paper process. This book was written by the Quality Control Systems Education Common Interest Group of the Process Control Division.  
      
    COMING SOON IN PRINT   
      
Production and Applications of Cellulose Nanomaterials
By: Alan W. Rudie, USDA Forest Service, Forest Products Laboratory,
Michael A. Postek, National Institute of Standards and Technology,
Robert J. Moon, USDA Frost Service, Forest Products Laboratory,
Michael A. Bilodeau, University of Maine

Cellulose nanocrystals and cellulose nanofibrils have been known for upwards of 50 years, but recent research suggesting very high strength properties and other unique physical properties have generated extensive interest in these materials. The book will be a collection of summaries on recently completed and on-going research with these high strength materials. This book will highlight cutting-edge research as well as leads on successful applications. Topics will include: production and modification, composites, other applications, modeling, and standards.

Back to top

 

The Pulp and Paper Manufacturers Association (PPMA) has launched its first-ever Best Place to Work Award. The award is open to all companies in the forest products industry and will look not only at corporate life but also look at how employees feel about their work environments.

In conjunction with Majority Opinion Research Group, PPMA has started taking nominations for this award and will continue to accept nominations through July 1.

"This award is an exciting opportunity for PPMA to honor great companies. As an association that serves HR professionals, we know the value of the making your company a great place to work," said PPMA President Joe Thibaudeau, employee relations manager - Procter & Gamble - Green Bay, Wis., USA.

The award will be presented to the winner at the annual PPMA conference on October 23-25, 2013, in Milwaukee, Wis., USA. The winner will have the chance to speak with conference attendees about what makes his or her company the "Best Place to Work."

PPMA is a nonprofit association built around a community comprised of executives, managers, and human resource professionals from the pulp and paper industry. For its members, PPMA serves as a primary source of information on labor settlements and current human resource issues, governmenta,l and related operational issues.

To nominate your company for the Best Place to Work Award, use the online form.

Back to top

 

Alabama Southern will host a one-day-only Operator Training Conference & Workshop. This complimentary event, funded by the National Science Foundation (NSF) in conjunction with NPT2, will help HR professional and mill leaders add value to their existing operator training programs and provide practical advice on how to create a more competitive and better trained workforce.

Date: Friday, July 18
Location: Alabama Southern, Thomasville, Ala.
Time: 8:00 a.m.- 3:00 p.m  CST

Discover new tools, learn best practices, and better equip your operator workforce. For more details or to register for the event, please contact Martha Wynn by email or by phone at 334.637.3194.

Back to top

 

Nominations for the major TAPPI 2014 awards are due by August 1. The awards that may be presented in the upcoming year are:

Gunnar Nicholson Gold Medal Award - The Association's highest technical honor may be presented annually to recognize an individual or individuals for preeminent scientific and engineering achievements of proven commercial benefit to the world's pulp, paper, board, and forest products industries and the other industries that TAPPI serves.

Herman L. Joachim Distinguished Service Award - The Association's highest award for service may be presented annually to recognize leadership and service that have significantly and demonstrably contributed to the advancement of the Association.

Paul W. Magnabosco Outstanding Local Section Member Award - The highest honor for Local Sections may be presented annually to recognize an individual for outstanding leadership and exceptional service to one or more Local Sections, which have resulted in significant and demonstrable benefits to the Local Section members.

TAPPI Fellow - TAPPI Fellows are individuals who have been members of TAPPI for not less than 10 years prior to the nomination, and who have contributed meritorious service to the Association and/or the paper and related industries. Retiring members of the TAPPI Board of Directors become Fellows automatically at the end of their term.

The TAPPI Awards and Honors page has links to these awards that will show the qualifications required and links to the nomination forms that must be completed. You may submit all nomination forms by email to standards@tappi.org, or you may fax them to the attention of the awards department at +1-770-446-6947, or send them by mail to TAPPI, Awards Department, 15 Technology Parkway South, Peachtree Corners, GA 30092, USA.

Back to top

 

The TAPPI Introduction to Kraft Pulping and Bleaching Course is coming August 5-6, 2013, at the TAPPI Training Facility.

This course is efficiently and expertly planned and taught by one of the world's most recognized educators in the pulp and paper industry, Dr. Michael Kocurek, Emeritus Professor, North Carolina State University. In just two days, you'll gain a valuable overview of kraft operations that would normally take nearly 15 days in other, more comprehensive training.

The TAPPI Introduction to Kraft Pulping and Bleaching Course is designed to:

• Expand overall understanding of kraft pulp mill operations
• Broaden awareness of how one part of the process affects other operations
• Demonstrate the affect of processes on kraft pulp quality
• Build confidence for better interaction among experienced process engineers and operators
• Help you troubleshoot product quality problems.

Participants will learn specifically about:

• Wood and fiber raw materials
• Preparation of wood and chips for pulping
• Preparation of white liquor
• Pulping terminology, pulp properties, and tests
• Batch and continuous cooking
• Kraft pulping chemical reactions
• Pulping variables and effects on properties
• Trends in kraft pulping and bleaching
• Brown stock washing
• Screening and cleaning
• Bleaching and oxygen delignification
• The pulp mill biorefinery.

Who Should Attend?
This course is ideal for anyone new to the kraft pulping process, particularly process engineers and operators.

Learning Outcomes
After successfully completing the course, participants should be able to:

• Describe and define kraft pulp mill processes, equipment, operating variables, and terminology, in order to increase ability to improve operations and pulp quality
• Recognize how one part of the process affects other operations, in order to increase awareness of thinking on a mill wide scale
• Interpret how the process variables affect pulp quality, in order to improve pulp quality and troubleshoot variations in quality
• Extend awareness of the complex environmental challenges associated with kraft pulp production.

Please register soon. Only 25 seats are available for this course to ensure the most beneficial interaction among attendees and the instructor.

Back to top

 

The 2013 TAPPI Linerboard/Medium Manufacture Course, August 13-15 at the TAPPI Training Room, in Peachtree Corners, Ga., USA, is designed to help increase your understanding of linerboard and medium performance properties and manufacturing to improve corrugated box performance and runnability.

This intermediate-level course is ideal for process engineers and operators in linerboard and medium manufacturing facilities and converting plants with a more intermediate background. For those participants who require an overview background on pulp and papermaking technology, there will be an optional one day Introduction to P&P on Monday afternoon, August 12, prior to the beginning of the main course on Tuesday. This supplemental session is intended for corrugators, new P&P mill and supplier personnel, and those without exposure to pulp and paper operations.

If you are looking to increase your understanding of linerboard and medium performance properties and how they are achieved, build your confidence in interacting more knowledgeably within the mill with suppliers and with corrugators, and improve manufacturing operations to produce a more competitive product, then this course is for you.

There are only 25 seats are available for this course. Register now to reserve your spot.

Back to top

 

The corrugated packaging and converting industry is heading for Indianapolis, Ind., USA, October 7-9, 2013, for TAPPI CorrExpo 2013. The JW Marriott is the waypoint where ideas turn into innovation. Join your colleagues to take advantage of highly-sought-after speakers, seminars, workshops, exhibits, and programs you don't want to miss:

• There will be two keynote presentations - Bob Chapman, CEO and chairman of Barry-Wehmiller, and Alexander Toeldte, president and CEO of Boise Inc.
• Extensive networking and sales opportunities on the sold-out exhibit floor
• Training and insight from the best in the industry
• A cutting-edge technology showcase exhibit of innovative trends and design
• Opportunity for one-on-one meetings with top-level attendees
• Problem solving with industry experts
• Numerous special events, including a welcome reception, golf tournament, gala at the Indianapolis Motor Speedway, and spouse/guest program
• Eye-opener sessions tackling timely topics affecting box plants today, with plenty of time for questions and interaction with the speakers
• Complimentary workshops on Wednesday afternoon for all registered exhibit visitors.

View the full program to see what's in store for you this October.

Register today.

Back to top

 

RockTenn will roll out the TAPPISAFE Safety Orientation Program at it's West Point, Va., mill. TAPPISAFE, a service of TAPPI offered in partnership with Alliance Safety Council, provides a standardized safety orientation program for contractors and is the only safety orientation program specifically designed for the industry, by the industry. 

"The TAPPISAFE program provides RockTenn's West Point mill with a proven safety orientation system that will ensure all contractors working on our site have the same safety orientation," said John Spangler, safety manager. "The comprehensive program provides an easy means of tracking and verifying that each contractor has received the same safety orientation. And TAPPISAFE includes both a common, basic safety orientation session as well as a session on topics specific to our facility, which is a key in a large, complex facility such as West Point." 

Larry N. Montague, TAPPI President and CEO, added that "TAPPI is very pleased to announce that RockTenn has chosen to utilize the TAPPISAFE program at its West Point manufacturing facility. Safety is of utmost importance to our industry and the TAPPISAFE program ensures that a standard level of safety awareness has been reached before any contractor goes to a jobsite or mill. RockTenn's adoption of the program at this facility further demonstrates how the industry has embraced use of the TAPPISAFE program."

The TAPPISAFE program provides a solid foundation in safety by addressing OSHA required awareness level safety orientation for any supplier or contractors that works in a pulp, paper, or packaging facility. Key aspects of the program include standardized courses that help reduce redundant and potentially costly safety orientations, up-to-date OSHA compliance information, and instantly verifiable records.

RockTenn is one of North America's leading producers of corrugated and consumer packaging and recycling solutions. Based in Norcross, Ga., USA, RockTenn employs approximately 26,000 people and operates more than 240 facilities in the U.S., Canada, Mexico, Chile, Argentina, and China. The West Point mill produces nearly 900,000 tons of linerboard and corrugating medium.

TAPPISAFE Programs also include PSM (process safety management), truck driver orientation, and employee orientation.

The Alliance Safety Council has more than 20 years of proven success in developing, delivering, and maintaining contractor safety orientations and has administered more than 1.2 million training units nationwide.

Back to top

 

The TAPPI Centennial Celebration will be a multi-year long series of outreach events and educational offerings showcasing the proud history and promising future of the global pulp, paper, packaging, and related industries. This once-in-a-lifetime event will expand public awareness, foster further connection, and provide outstanding opportunities for collaboration, growth, and investment in our future for all of those involved. Goals for the TAPPI Centennial Celebration are:

• To honor TAPPI's 100 years of connection, education, and advancement as a foundation for the sustainable success of our members, our industries, and the world we share
• To recognize the achievements of those who built our industry and to inspire those who seek to build its future
• To celebrate the contributions and innovations of the global pulp, paper, and packaging industries to human culture, commerce, health, and social advancement
• To sustain the industry and support its growth, vitality, and future through the TAPPI Foundation.

We invite you to be a part of this momentous event. The sooner you join us the more opportunities there are for recognition of your company, its products, and key innovations. Keep in mind that an early commitment allows you to spread your investment over multiple years' budgets.

For more information on sponsorship and volunteer opportunities please contact dbell@tappi.org.

The sponsorship prospectus can be downloaded online.

Back to top

 

Do you have a history book gathering dust on your shelf? TAPPI's 100th year is coming soon and we are looking for donations to the TAPPI Library. Specifically, we are interested in histories of companies and mills in the paper and packaging industry (both producers and suppliers). Each donated book will have a bookplate in the front cover recognizing the donor. For more information please contact David Bell.

Please send books to:
c\o David Bell
TAPPI
15 Technology Parkway, South
Suite 115
Peachtree Corners, Georgia 30092

Back to top

 

Are you ready to go further, faster in your safety career? The Certified Occupational Safety Specialist (COSS) class can take you there.

The COSS Class is Unique
Not only will you learn how to read and understand the OSHA 1910 and 1926 CFRs and help your company avoid OSHA citations that cost millions of dollars, but more importantly, by learning how to work safely on a job site, you can teach your company how to lower fatalities and near misses. Almost 47% of COSS graduates responding to our survey indicate that, since taking COSS, their company's injury rate and/or OSHA recordables have decreased by as much as 25% and others attest to as much as a 100% decrease!

Request a Course Outline & Syllabus for more information.

The class also addresses the psychology of safety, the true cost of an accident, hazard recognition, how to start up a health and safety program, behavior based safety, system safety, and much more!

What Will You Receive?
Upon successfully completing the class, you will obtain your national Certified Occupational Safety Specialist (COSS) designation, your OSHA 10-hr. card of completion in construction, and your OSHA 10-hr. card of completion in general industry.

National Program Recognitions
COSS is currently one of only 37 programs in the world recongnized and accredited by the American Petroleum Institute (API). In addition, the certifying body for construction education for colleges, universties and technical/trade schools, American Council for Construction Education (ACCE), has also recongnized our program. COSS is the only non-degree program to receive this national endorsement. Lastly, COSS has been established as a mandatory course for students in the Construction Management Program at Louisiana State University.

Program Content
The program consists of 40 hr. of hands on, face-to-face learning, which is delivered by an Authorized OSHA outreach trainer in both construction and general industry. Case studies and workshops are used extensively to bring learning objectives into focus. Guest speaker from areas such as OSHA and other governmental agencies are used to enhance the learning experience. Student presentations, daily quizzes, practical reviews, and a comprehensive final exam will allow you to demonstrate your competency.

Prerequisites
The only prerequisite for the COSS class is you must have a high school diploma or equivalent. In each class, we tend to have a mix of non-experienced, first time safety persons, as well as safety professionals who have been in the safety field for 20+ years. But, we have learned that regardless of the numbers of years of experience you have in safety, everyone leaves the COSS class with a wealth of knowledge!

Visit the COSS website for FAQs, testimonials and a list of clients that have taken COSS.

Register now.

If you would like more information on the COSS program, contact Beth Gordon at 877-610-2677.

Back to top