Robert (Bob) Vyse has been named the recipient of TAPPI's 2013 Gunnar Nicholson Gold Medal Award, the highest honor that the Association can bestow upon an individual. The award will be presented to Vyse at the 2013 PaperCon Conference Awards Dinner on Tuesday, April 30, in Atlanta, Ga., USA.

"TAPPI is very pleased to announce that Bob Vyse will receive the 2013 Gunnar Nicholson Gold Medal award in recognition of his many significant contributions to the development and application of cross-machine control technology," notes Larry N. Montague, president and CEO of TAPPI. "His work in advancing the science of CD control actuators and process technology has provided great benefit to the industry by improving paper quality and paper machine operations. This prestigious award recognizes the importance and the impact of this work."

Vyse, a native of Vancouver, B.C., Canada, began his career with MacMillan Bloedel in Vancouver and Powell River, B.C., followed by 10 years as VP and projects manager of Omni Continental Ltd. He then joined Devron Engineering (which subsequently became Measurex – Devron, Honeywell Measurex Devron, and Honeywell) where he was director of R&D and process control for more than 20 years before retiring in 2008. He was involved in the development and application of various CD control actuators and technology, in particular the combined application of steam and induction energy devices in advanced finishing technology.

 An active member of TAPPI and PAPTAC conferences, Vyse authored numerous papers on papermaking technology, particularly on CD weight, coat weight, moisture, and caliper control. He also lectured at UBC, TAPPI pressing and drying courses, and PAPTAC papermaking technology courses. In 2010, Vyse was honored with the TAPPI Process Control Division Award. His education includes BASc, MSc, and PhD degrees in Engineering Physics and Physics from the University of British Columbia, as well as a postdoctoral Fellowship at Centre d'Etudes Nucleaires de Saclay in France.

Back to top

 

Two special TAPPI webinars on February 21 and March 13 provide inside previews of PaperCon 2013 in Atlanta, Ga., USA, April 27 - May 1

Webinar No. 1

Innovation in Safety: The Leading Edge of Leading Indicators
Thursday, Feb. 21, 2013 - 12:00pm - 1:00pm EST

Register to attend.

Learn how statistical analysis and data management can be used more effectively for safety performance management through a demonstration of a numerical system of leading indicators that can predict potential workplace accidents, helping mills to prevent them. Based entirely on objective, measurable data, this predictive system is an excellent resource for proactive safety management.

This discussion will focus on identifying, quantifying, and combining measurable parameters into a safety performance model that clearly defines both environmental risk and individual risk in a way that affords us necessary clues for an effective accident prevention program. Learn more.

Webinar No. 2

Increasing Paper Machine Agility with a Novel Grade Change Concept
Wednesday, March 13, 2013 - 12:00pm - 1:00pm EST

Register to attend.

A narrow grade mix and long grade runs were once common. Not today. Most machine make a wider set of products with many grade changes. A new grade transition concept makes such machines more competitive by increasing the stability and agility of the line. Unlike traditional programs, the new grade change concept replies on normal quality controls to move the machine from one grade to the next, quickly and smoothly in a closed loop. Learn more.

Back to top

 

A special survey being conducted by Two Sides U.S. Inc., Chicago, Ill, is seeking opinions on paper bills versus e-bills. To participate in this very important survey, use the online survey form, which will take only about five minutes to complete. Opinions are being sought from people both inside and especially outside of the print, paper, and mail value chain. Results will be published by Two Sides and also will be summarized in a near-future issue of Over the Wire.

As Two Sides explains, it is becoming common practice for companies to encourage consumers to switch to electronic billing services instead of paper bills. Sometimes this is presented as being better for the environment. "We would greatly appreciate a few minutes of your time to get your opinions about the environmental messages used to promote electronic billing," Two Sides emphasizes.

Two Sides is an independent, non-profit organization created to provide members of the graphic communications supply chain a forum to promote the responsible production and use of print and paper, improve sustainability standards and practices, share experiences, and maximize customer confidence in our products.

To participate in this survey, please use the easily completed online survey form.

Back to top

 

Tissue360 Forum @ PaperCon 2013
Monday, April 29 - Wednesday, May 1
Atlanta, Ga., USA

TAPPI's new Tissue publication, Tissue360^o magazine, and TAPPI tissue experts have organized Tissue360 Forum, a comprehensive technical forum covering all aspects of tissuemaking. You will hear about the latest tissue technology, market trends, and pick-up some runnability/operational tips. The program is open to all full PaperCon registrants.

Program Overview:

Hygenic Products Market Overview
Session Chairs: Ken Patrick, Tissue360^o

Chemistry Solutions for Tissue Making
Session Chair: Gary Furman, Nalco

Water and Energy Strategies for Tissue
Session Chair: Tom Jenn, Kimberly-Clark

Premium Tissue Manufacturing Technologies
Session Chair: Soren Eriksson, Metso

Tissue Controls and Measurement
Session Chair: Rene Naranjo, AstenJohnson

Yankee Reliability (CEUs provided)
Session Chair: Al Coons, Clearwater Paper

Converting Efficiencies
Session Chair: Kevin Brennan, Ashland Water Technologies

See the full Tissue360 Forum program.

PaperCon will take place April 27 through May 1, 2013 in Atlanta, Ga., USA. Designed by industry professionals, PaperCon brings together CEOs, mill managers, superintendents, scientsits, process engineers, and suppliers for the largest pulp and paper technical program in the world. No other such event provides such a comprehensive program, networking opportunites, and trade fair among such a distinguished group of industry leaders.

Learn more abut PaperCon 2013.

Back to top

 

The TAPPI Tissue Properties & Manufacturing Course will be held on April 27-28, 2013 in Atlanta, Ga., co-located with PaperCon 2013 and the Tissue Forum. This is a great opportunity to get the most out of your conference experience. This Tissue Properties course is designed for those who desire an introductory-to-intermediate level, comprehensive, and structured course on tissue properties and the effect of manufacturing. The course precedes the Tissue Forum at PaperCon 2013 and is an excellent educational component to these technical sessions.

This course will be particularly helpful to non-technical professionals, technical process engineers, operators, suppliers, converters and marketers with 0-5 years of experience in tissue manufacturing. Go to the course website to learn more.

Back to top

 

The highly-regarded Executive Panel on Monday, April 29, will illuminate how industry leaders are thinking and driving innovation in their companies.

See who's speaking.

Designed by industry professionals, PaperCon (April 27 - May 1 in Atlanta, Ga., USA) will bring together CEOs, mill managers, superintendents, scientists, process engineers, and suppliers for the largest pulp and paper technical program in the world. No other event provides such a comprehensive program with networking opportunities and trade fair among such a distinguished group of industry leaders.

Back to top

 

Free TAPPI Webinar
Tomorrow, Friday, February 15, 2013
12:00 - 1:00 PM EST

What's Missing in Your Contractor Safety Management?

In 60 short minutes, you will learn:

• How to leverage best practices for contractor orientation
• How standardized contractor orientation protects your company
• How to reduce your staff time administering orientation
• How you can update or create your site specific orientation at no cost to your mill.

The TAPPISAFE program provides a means for outside contractors and suppliers to complete OSHA required safety awareness-level orientation and site specific safety orientation before ever stepping foot in your mills.

It is the only contractor orientation developed for and by the pulp and paper industry.

Best of all, there is no cost to mills to participate in the program. TAPPISAFE will update or develop your site specific orientation once you enroll.

Register now for the webinar.

Webinar led by Larry N. Montague, president and CEO of TAPPI, Eric Fletty, VP of operations, TAPPI, and Tess Ventress, TAPPISAFE program director.

Back to top

 

Gopal Goyal often notes that it is the connections he made through membership in TAPPI that really helped launch his career. "I kept telling people that I have gotten more out of TAPPI than TAPPI has gotten out of me." Having joined back in 1985 while a graduate student in pursuit of an advanced degree in the pulp and paper field, Gopal attended his first TAPPI pulping conference and was deeply impressed with the depth and breadth of knowledge he found under a single roof.

"You could approach any of these experts and have a technical discussion, which helped me tremendously in focusing my graduate research," he said. That initial meeting led to nearly 30 years of active involvement, including an array of voluntary leadership positions. Since those early days, he has consistently found TAPPI to be a great venue for making connections with leading industry experts and establishing a global network of contacts. He also notes that the active volunteer role he pursues at TAPPI to this day helped him to develop and apply leadership and teambuilding skills at his job.

Find out more by reading this month's Member Spotlight.

Spotlight participants are recommended by fellow members and staff. If you wuld like to nominate a member just send their name (or names) to MemberSpotlight@tappi.org. We will forward a Spotlight Questionnaire to fill out and return.

We look forward to seeing you in the Spotlight!

Back to top

 

The highly regarded panel on Monday, April 29, will illuminate how industry leaders are thinking and driving innovation within their companies.

See who's speaking.

Designed by industry professionals, PaperCon will bring together CEOs, mill managers, superintendents, scientists, process engineers, and suppliers for the largest pulp and paper technical program in the world. No other event provides such a comprehensive program, networking opportunities, and trade fair among such a distinguished group of industry leaders.

Back to top

 

One of TAPPI's most exciting new products is the wall-sized, laminated 2013 Pulp & Paper "Mills of the World" Map.

A winning combination of high quality print and paper stock along with brilliant colors makes this the perfect map to frame and hang in your office. The "Mills of the World" map features include:  

• Every mill in the world producing 50 tpd or more
• Major greenfield projects
• Design elements showing mill characteristics, forest cover, and typography
• 3 ft. x 5 ft. (or 0.99 x 1.5 meters) .

Each map will be shipped in a protective tube, ready for display.

Don't miss out on this popular item. Order your Pulp & Paper "Mills of the World" Map today.

Product code: 12PPMAP

Member Price: $299.00

Non-Member Price: $319.00

Back to top

 

The Introduction to Traditional and Emerging Printing Technology Course will be co-located at the 2013 PaperCon Conference, April 27-29, 2013, in Atlanta, Ga., USA.

This is an introductory course on printing methods and applications, designed for those who need to understand print quality, attend print trials, trouble shoot print problems or are generally new to printing operations. It will be taught by printing experts from TAPPI's Coating and Graphic Arts Division and is an excellent complement to the Coating Program at PaperCon.

As an added bonus, the course will include a tour of Hewlett-Packard's new state-of-the art facility where production laser and inkjet presses will be demonstrated.

Course attendees may also join the Coating and Graphic Arts Opening Session where printing visionary Frank Romano is giving the keynote address. Learn more and register online.

Back to top

 

The Virginia-Carolina TAPPI Local Section is hosting its Winter Conference in Richmond, Va., USA, on Monday, February 25, with a program focus on "Boiler MACT and Bioenergy Enhancement, Policy, and Standards." Speakers include Dr. Justin Baker of RTI International, Roger Leimbach of Metso Automation, Phil Sparks of Save Environmental, and Dr. Med Byrd, Director of the Department of Forest Biomaterials, North Carolina State University.

The conference will be held at the Hyatt Place Richmond Arboretum. Registration is open and table-top exhibit space can be purchased. The agenda and registration forms are both available online.

Back to top

 

PaperCon Programs Now Available

Customize your learning and networking experience at PaperCon to best fit your professional needs. Bring back ideas, innovation that will help you be more effective and efficient.

Papermakers program will give you everything you need to know about paper machine performance evaluations, running mill trials, and product certification.

Eight peer-reviewed Coating sessions focus on scientific developments and practical tips. Highlighs include opacity enhancement with Ti02 and advancements in barrier coating.

PIMA Management sessions provide excellent insight for mill managers, production managers, and executives. This year's sessions will help you develop effective labor/management relationships and show you how to motivate today's employees.

The Tissue360 Forum provides a comprehensive peer-reviewed technical program unlike any other. You will learn about fiber, water, and energy savings, the latest softness and strength additives, and forming concepts.

The OpEx Reliability Workshop will help you improve reliability and maintenance in your mill. Operator driven reliability, alignment, education, and mill processes will be addressed by leading reliability experts.

The Young Professionals Program (YP) offers those new to the industry an unbelievable opportunity to gain basic industry knowledge and meet experienced industry leaders.

Back to top

 

Are you ready to go further, faster in your safety career? The Certified Occupational Safety Specialist (COSS) class can take you there.

The COSS Class is Unique
Not only will you learn how to read and understand the OSHA 1910 and 1926 CFRs and help your company avoid OSHA citations that cost millions of dollars, but more importantly, by learning how to work safely on a job site, you can teach your company how to lower fatalities and near misses. Almost 47% of COSS graduates responding to our survey indicate that, since taking COSS, their company's injury rate and/or OSHA recordables have decreased by as much as 25% and others attest to as much as a 100% decrease!

Request a Course Outline & Syllabus for more information.

The class also addresses the psychology of safety, the true cost of an accident, hazard recognition, how to start up a health and safety program, behavior based safety, system safety, and much more!

What Will You Receive?
Upon successfully completing the class, you will obtain your national Certified Occupational Safety Specialist (COSS) designation, your OSHA 10-hr. card of completion in construction, and your OSHA 10-hr. card of completion in general industry.

National Program Recognitions
COSS is currently one of only 37 programs in the world recongnized and accredited by the American Petroleum Institute (API). In addition, the certifying body for construction education for colleges, universties and technical/trade schools, American Council for Construction Education (ACCE), has also recongnized our program. COSS is the only non-degree program to receive this national endorsement. Lastly, COSS has been established as a mandatory course for students in the Construction Management Program at Louisiana State University.

Program Content
The program consists of 40 hr. of hands on, face-to-face learning, which is delivered by an Authorized OSHA outreach trainer in both construction and general industry. Case studies and workshops are used extensively to bring learning objectives into focus. Guest speaker from areas such as OSHA and other governmental agencies are used to enhance the learning experience. Student presentations, daily quizzes, practical reviews, and a comprehensive final exam will allow you to demonstrate your competency.

Prerequisites
The only prerequisite for the COSS class is you must have a high school diploma or equivalent. In each class, we tend to have a mix of non-experienced, first time safety persons, as well as safety professionals who have been in the safety field for 20+ years. But, we have learned that regardless of the numbers of years of experience you have in safety, everyone leaves the COSS class with a wealth of knowledge!

Visit the COSS website for FAQs, testimonials and a list of clients that have taken COSS.

Register now.

If you would like more information on the COSS program, contact Beth Gordon at 877-610-2677

Back to top

 

A Call for Papers is underway for these three co-located events:

The 2013 TAPPI PEERS Conference, September 15-18, 2013 in Green Bay, Wi., USA has announced the Call for papers. PEERS is the perfect forum for paper industry professionals both to acquire practical operating insights and to network with industry peers in technical sessions, tutorials, round tables, new technlogy sessions and workshops. Suggested topics and more information now available. Deadline for abstracts is March 1, 2013.

An Invitation to Present has been announced for TAPPI's 2013 International Bioenergy and Bioproducts Conference (IBBC), September 18-20, 2013 Green Bay, Wi., USA. IBBC is the only event dedicated to advancing biorefineries in the forst product industries, and for the first time will be ehld in the Midwest, providing an expanded focus on activities in Wisconsin and surrounding areas. Suggested topics and more information now available. Deadline for abstracts is March 1, 2013.

The International Program Committee for the 10th Research Forum on Recycling announces an Invitation to Present at the 2013 event, September 16-18, 2013 in Green Bay, Wi., USA. Research engineers, scientists, and practitioners are encouraged to submit presentation proposals on all aspects of recycling technologies and operations. Submissions describing both basic and applied research results will be considered. This year's event will provide participants an extraordinary opportunity to hear about the latest in recycling research, discuss mill operation issues, network with peers, and identify future research needs of the recycling community. Deadline for abstracts is March 1, 2013. Learn more.

Back to top

 

David Schirmer, Vice President and General Manager of Hearst Enterprises will Keynote at Tappi's Shipping Receiving and Warehousing Workshop this April in Nashville. Schirmer is responsible for paper procurement for divisions of Hearst Corp. including Hearst Magazines and Hearst Newspapers and is one of principles of Newsprint Purchasing LLC.

Tappi's SRW Workshop, taking place April 9-10, focuses on reducing in-transit paper roll damage through collaborative discussions and best practices. Learn more about SRW.

Back to top

 

Paper Roll Damage Expensive?

Attend TAPPI's SRW Workshop this April and be a part of this dedicated group of mills, carriers, warehouses and printers as they collaborate to reduce in-transit damage to rolls of paper.

The Shipping, Receiving and Warehousing Workshop is an affordable working meeting with presentations and collaborative discussions, engaging keynote speakers, and great opportunities for networking. It's something you can't afford to miss.

Why attend?

• Keynote Presentation by Dave Schirmer, Vice President and General Manager of Hearst Enterprises responsible for paper procurement for divisions of The Hearst Corporation.
• Presentations provided by experts from the class 1 railroads, intermodal providers, warehouses, shippers and dunnage manufacturers with extensive experience and practical background knowledge.
• Practical information sharing by all parties in the paper manufacturing supply chain in an interactive environment
  
• Excellent networking opportunity - paper buyers, paper companies, carriers, securing / damage prevention specialists, block and bracing manufacturers, safety experts - all under one roof.

Learn more about the Shipping, Receiving and Warehousing Workshop.

Back to top

 

The International Mechanical Pulping Conference, sponsored by PI, TAPPI, PAPTAC, SPCI and PTF, will be held on June 3-5, 2014, in Helsinki, Finland.  IMPC 2014 is a major part of PulPaper, one of the world's most premier pulp and paper exhibitions, coinciding with the 100th anniversary of PI, the Paper Engineers' Association.

The Conference Program Committee invites you to submit papers on the following topics:

1. Energy saving in Mechanical Pulping process
2. New applications and innovations
3. Raw materials in Mechanical Pulping
4. Advanced Mechanical Pulping technologies e.g.

• Process control and simulation
• Bleaching
• Water management and effluent treatment

        5.  Mill operations update e.g.

• Production cost saving technologies (energy and chemicals)
• Improving mechanical pulping business potential

        6. Mechanical pulps in paper and board.

Authors interested in presenting a paper or a poster on these topics should submit an extended abstract (˜500 words) to impc2014@vtt.fi. Abstracts are due by February 28, 2013. Authors will be notified of acceptance by May 31, 2013 and final manuscripts are due March 31, 2014.

If you have any questions, please contact Sari Liukkonen, Chair of the Program Committee at +358 40 586 0384, or by e-mail at impc2014@vtt.fi.

Back to top

 

TAPPI and NCSU are partnered again for the first of three introductory level courses for industry professionals that cover the entire pulping and papermaking process.

The 2013 Hands-On Workshop for Pulp and Paper Basics takes place March 4-8 at North Carolina state University in Raleigh, N.C., USA.

This workshop fills to capacity quickly, so reserve your place now so that you can:

• Find out how different processes affect paper properties
• Perform hands-on laboratory experiments to support your understanding of the process
• Run a pilot plant paper machine
• Solidify your knowledge from close interaction with professionals in small, interactive groups.

Be among the first 32 people to register for this five-day workshop, and you'll gain an invaluable overview of pulping, bleaching, chemical recovery, recycling, papermaking, and converting. You'll receive course notes, a CD, a polo shirt, and 3.7 CEUs!

This workshop is ideal for new process engineers, manufacturing operators and technicians, sales and service personnel, machine operators, and maintenance personnel -- everyone who wants a better understanding of the pulp and paper business.

Don't wait too long to register for the March 4-8 workshop. Two additional courses are being offered at NCSU in June and October for those who aren't able to attend the first event.

Back to top

 

Strengthen your understanding of the corrugating process, and linerboard and medium performance properties and manufacture with TAPPI's Linerboard Medium & Corrugated Box Manufacture Course, April 15-16, at the Holiday Inn in Neenah, Wis., USA.

With an emphasis on helping attendees improve corrugating box performance and runnability, this popular introductory to intermediate level course is ideal for process engineers and operators in linerboard and medium manufacturing facilities and corrugating and converting plants.

Instructors Michael J. Kocurek, Professor Emeritus, of Paper Science & Engineering at North Carolina State University, and Jon Porter, Senior Trainer / Process Specialist for Fosber America will address:

• The Corrugated Session (1/2 day) will cover how to achieve the strongest bond and highest quality combinerboard. You'll learn about (1) the equipment, (2) starch, (3) corrugated process technology, and (4) importance of linerboard and medium properties and runnability.
• The Properties and Testing of Liner and Medium session (1/2 day) covers the tests, what they mean, and how the properties of the board affect the tests.
• The Pulp and Paper Mill Operations session (1 day) will cover the technology of the pulp and papermaking processes, and how they affect the quality, properties, tests, and runnability of the liner and medium. 

View the proposed course schedule.

Register by March 15 to take advantage of the Early Bird registration discount. Join TAPPI or renew your membership for the best rates!

Back to top

 

The TAPPI Troubleshooting "Flexos" and "Die Cutters" Sustain Board Caliper & Improve Printing Course is scheduled for April 16-18, 2013, in Neenah, Wis., USA. Join industry veteran Dick Target, founder of On Target Consultants, as he helps attendees identify and address downtime issues and develop a better understanding of machine calibration and how to maintain proper board caliper during the converting process.

Target will use an easy to understand format to help attendees improve the basic manufacturing process. Topics will include: methods to minimize caliper loss in the converting process; one-box set-up techniques; and waste reduction techniques. View the course schedule.

Take advantage of the Early Bird Registration discount before March 16. Join TAPPI or renew your membership for the best rates!

Back to top

 

The Secret, Second Edition
What Great Leaders Know and Do

By: Ken Blanchard & Mark Miller

• Uses the popular "business fable" format that Ken pioneered
• Explains the five essential practices exhibited by the best leaders and provides practical ideas on how to make these a reality in your life.
  

At one time or another, everyone in a position of authority-whether in a multinational corporation or a local volunteer group-wonders what the key to great leadership is. And who better to answer that question than the team of Ken Blanchard, whose books on leadership have sold over 20 million copies, and Mark Miller, who worked his way up from line worker to vice president of one of the largest fast-food chains in the country. In The Secret, Blanchard and Miller use the uniquely accessible "business fable" format that Blanchard pioneered to get at the heart of what makes a leader truly able to inspire and motivate people. Debbie Brewster, recently promoted and struggling, finds herself about to lose her job due to poor performance. In an attempt to save her career, she enrolls in a new mentoring program offered by her company. Much to her surprise, Debbie finds her mentor is none other than Jeff Brown, the president of the company. Debbie decides that she is going to ask her new mentor the one question she feels she desperately needs answered: "What is the secret of great leaders?" Jeff's immediate answer-that great leaders serve their followers-completely flummoxes Debbie. Over the next 18 months, Jeff helps Debbie discover and explore five fundamental ways that leaders lead through service.

The Secret puts what Blanchard and Miller have learned about leadership in a form that anyone can easily understand, embrace, and pursue. It is a book that will benefit not only those who read it, but also the organizations they work in an the people who look to them for guidance.

The second edition includes revised and updated content including:

• A new foreword by John Maxwell
• A new resource section in the back matter summarizing key learning points
• A greater focus on the book's primary focus: servant leadership
• A more humanized protagonist
  
• Numerous other minor renovations throughout. 

Ken Blanchard, coauthor of The One Minute Manager, the bestselling business book of all time!

Item #: 12SECRET

View the Table of Contents and Preview.

Member Price: $23.00

Back to top

 

PaperCon Session: Insights into Effective Labor/Management Relationships
Organized by PPMA and PIMA
Monday, April 29, 2013 - 1:30-3:00pm

Many companies have embraced innovative processes for managing labor-management relationships. These processes result in better communication, more effective problem solving, and alignment around shared business goals. Attend this session at PaperCon, part of the PIMA Management Program, and hear examples of effective labor/management teams that yield positive business results. Panelists will share first-person testimonials and stories of challenge, frustration, and success.

Moderator:
Roger Hagan, Zilkha Biomass Energy

Panelists:
Steve Myers, mill manager, Thilmany Paper, Kaukauna, Wis.
Peter Tantalo, operations manager, RockTenn Solvay, Syracuse, N.Y.
Mike Rayome, director, human resources, Graphic Packaging, Wausau, Wis.
Karl Christianson, mill manager, RockTenn, Stevenson, Ala.

PaperCon will take place April 27 through May 1, 2013, in Atlanta, Ga, USA. Designed by industry professionals, PaperCon brings together CEOs, mill managers, superintendents, scientists, process engineers, and suppliers for the largest pulp and paper technical program in the world. No other event provides such a comprehensive program, networking opportunities, and trade fair among such a distinguished group of industry leaders.

Learn more about PaperCon 2013.

Back to top

 

By: Jerome M. Gess and Paul H. Wilson

This book takes the reader through the process of making paper, pointing out where interruptions can occur and where elements added to the system can cause problems in that part or subsequent parts of the papermaking process. The aim of this book is to give papermakers and those involved in the papermaking process the information required to allow them to understand how to track down and solve problems at their source rather than where the problems surface.

Troubleshooting the Papermaking Process.

View the Table of Contents.

Product Code: 0101R298

Member Price: $106.00

Non-member Price: $161.00

Back to top