TAPPI Over The Wire Paper 360
Past Issues | Printer Friendly | TAPPI.org | Advertise | Buyers Guide | Travels with Larry Archive Facebook Twitter LinkedIn
       

Voith Presents New Screen Plate with Significantly Extended Service Life for Recovered Paper Pulping

Print Print this Article | Send to Colleague

Voith now offers a new screen plate design for pulpers used in recovered paper pulping. The CurvedBar screen plate extends service life in Voith's IntensaPulper IP-R by more than 50 percent and improves the quality of fiber suspension. For mills, its implementation means less maintenance effort and material use, as well as fewer downtimes, leading to a more efficient overall process and lower costs. Paper manufacturer Shanying International Holding Co. LTD., has tested the CurvedBar screen plate on its PM 5 in Maanshan, China, and is now equipping its other pulping systems with the innovative solution.

“With the new CurvedBar technology, we substantially reduced downtime and extended maintenance intervals at the pulper with consistently high operating quality,” says Wan Tao, Vice President Production at Shanying International Holding Co. LTD. “We also achieved very positive results from the coarse screening.”

To reduce the high mechanical loads on the screen plate, Voith developed an innovative curved bar design and optimally matched it to the geometries of pulper, rotor and screen plate. “This results in a much longer service life compared to conventional screen plates,” explains Oliver Lüdtke, Global Service and Product Manager at Voith Paper. The lower friction also reduces energy consumption. “Combined with savings in material and maintenance, significant cost-saving potential can be realized, and the customer’s carbon footprint is reduced due to greater sustainability,” says Lüdtke.

Lower shearing forces, higher quality fiber suspension and problem-free ragger formation

Thanks to the lower shearing forces on the screen plate, far fewer contaminants are shredded. This improves the quality of the fiber suspension, reduces the amount of small rejects that need to be laboriously removed in the downstream process steps and allows trouble-free ragger formation. Furthermore, the risk of bar breakage and deformation of the screen plate is significantly reduced. The CurvedBar screen plate has proven its effectiveness at Shanying in Maanshan and other locations.

“With the new curved technology and premium W material, we optimized and reduced the flake content and are maintaining high-efficiency pulping performance in the long term,” says Song Jie, Manager of the Technical Department at Shanying International Holding Co. LTD. “The flake content is about 15 percent, the lifetime of high-efficiency pulping performance is extended from two months to five months.” 

“We still keep very good collaborating relation with Voith for the OCC stock preparation and paper machine, especially for testing the performance of the screen plate with CurvedBar and premium W material,” Jie adds. “We value the excellent and professional support provided by Voith during installation and commissioning of the screen plates. At all times, Voith was in close contact with us to continually optimize the equipment. We are very satisfied with the results and happy to have Voith as a strong partner by our side.” 

Following the successful pilot phase, the paper manufacturer has already awarded Voith several follow-up orders to successively retrofit other pulpers with the new components. Other customers have also placed repeat orders for the innovative screen plate design following successful testing.

For more information about CurvedBar please visit: http://voith.com/corp-en/papermaking/pulping-solutions.html

 

Back to TAPPI: Over The Wire

Share Share on Facebook Share on Twitter Share on LinkedIn