USSD Monthly News
 

Leveraging PFMA to Perform SQRA

Print this Article | Send to Colleague

Leveraging PFMA to Perform SQRA
5-Day Virtual Workshop

May 15-17, & May 22-23

Eligible for 22 PDH credits
New York State Sponsor of Engineering Continuing Education Programs

Despite the criticism that Potential Failure Mode Analysis (PFMA) has received following the Oroville Dam spillway incident, it has been viewed as a standard of care for dam safety evaluations in the U.S., and with some possible improvements to be more expansive, is expected to be so into the future. Many PFMA’s have been performed for state- and federally regulated dams, and as a result of that investment, considerable knowledge has been obtained about vulnerabilities associated with specific dams. As the federal dam owners have embraced risk assessment as the next step in ensuring that dam safety risks are properly evaluated and managed, it is expected that private and state dam owners will benefit from following suit. Indeed, the Federal Energy Regulatory Commission (FERC) has recently adopted Risk Informed Decision Making (RIDM) as part of their engineering guidelines. The intent of this training is to leverage and improve on the significant investment that has already been made in performing PFMA’s, and use this information to perform semi-quantitative risk assessments (SQRA) for individual dams or dam portfolios. These assessments can then be used as a screening tool to identify PFM’s and overall risks which are not likely to meet Tolerable Risk Guidelines (TRG) based on life safety, and as a prioritization tool for reducing risk, performing additional investigations or studies, or performing quantitative risk assessments. A simplified method for categorizing additional consequences such as those incurred at Oroville is also presented in this training.

Event and registration information can be found at www.ussdams.org.

 

Back to USSD Monthly News

Share on Facebook Share on Twitter Share on LinkedIn