Sprayfoam Pro Newswire
September 7, 2016
Industry News And Announcements
International Fireproof Technology Inc.
From the Current Issue of SPRAYFOAM PROFESSIONAL Magazine
The summer issue of SPRAYFOAM Professional has been mailed and emailed! If you didn't receive it in your inbox or mailbox and would like to be on our email list to receive the digital link, sign up here.
Be sure to read Kate Zabriskie's article "Being Liked is Serious Business" as she discusses ten steps you can take to repair and protect your online reputation. Read all of this and more in the Summer Issue of SPRAYFOAM Professional
August 18, 2016 – The SPFA Building Envelope and Technical Oversight Committees are pleased to announce an update to SPFA-126 "Thermal Barriers and Ignition Barriers for the Spray Polyurethane Industry". This new document, last revised in 2011, represents significant changes to content to address recent changes in the 2015 IRC and IBC model building codes. A volunteer task group led by Lindsay Lenze of NoBurn worked diligently since April to develop this updated document. Many thanks to those that participated on this project. Copies of SPFA-126 and all other SPFA TechDocs may be downloaded at no charge from the SPFA website at: http://www.sprayfoam.org/technical/spfa-technical-documents
In 2013, the SPFA Safety Committee developed two OSHA-compliant, bilingual jobsite safety signs. These included a Do Not Enter sign and a Fire Hazard sign.  The Do Not Enter sign should be placed at all entry points of the spray zone to provide adequate warning of the need for proper PPE.  The Fire Hazard sign should be placed throughout any area interior area with exposed SPF not protected with a fire protective covering or coating, to prevent ignition of exposed foam during construction.  

In 2016, two more OSHA-compliant jobsite safety signs were added.  The first is the No Storage sign.  This sign should be prominently and permanently placed in all attics and crawlspace areas where the foam is not covered with an approved 15-minute thermal barrier.  It warns building owners that no storage is permitted in these areas.  The second new sign for Permit Confined Spaces, should be placed at the entry point of all Construction Confined Spaces, per the new OSHA regulations.

All four signs are provided as a color PDF and formatted for 8.5 x11 paper.  If a larger sign is needed, they can be scaled by changing the printer settings.  A single PDF file containing all four signs can be downloaded from the SPFA Members Only website.

For more information, contact Rick Duncan, Technical Director, SPFA   rickduncan@sprayfoam.org
Industry News and Announcements
>> Gaco Western Appoints Chuck Skalski as President
>> Global Chemicals Production Softens After Six Months of Stable Activity
>> Home Improvement Projects Drive Sales of Spray Foam Insulation
>> OSHA Appoints New Director for its Construction Directorate
>> Proposed ASHRAE/ACCA Standard for Energy Audits Open for Comment
>> Get Ready for 600,000 Commercial Drones
>> Aetna’s Exit from Obamacare Stokes Growing Concern
SPFA News and Announcements
The Spray Polyurethane Foam Alliance (SPFA), the educational and technical voice to the spray polyurethane foam industry, today announced its newly elected Board of Directors. Representing senior leaders from both the contractor and manufacturer sectors, the 15-member Board includes an Executive Committee and 12 additional voting members.
SPFA exhibited and was invited to speak in the policy session at the 19th Annual Congressional Renewable Energy and Energy Efficiency Expo held in the Cannon House Office Building, Washington, DC on July 12, 2016. This was a coming-together of the biggest names in government and the biggest names in renewable energy and energy efficiency. SPFA delivered the message that if customers are going to be looking for high performance, energy efficient and sustainable buildings, they are going to be looking for sprayfoam insulation and roofing. To view information about the event, or to watch Kurt Riesenberg, SPFA Executive Director speaking in the Policy Forum (Panel 3), click below.
The 2017 Sprayfoam Convention and Expo will take place from January 29 through February 1, 2017, will be held at the Renaissance Palm Springs Hotel and Palm Springs Convention Center in Palm Springs, California. For more information or to register, please visit the website at www.sprayfoam.org/expo
Do you have a topic that you think would be a great fit for the Sprayfoam 2017 Convention & Expo? Are you a speaker or do you know a speaker that would be perfect for the SPF industry?

Submit your topics and ideas today for the Sprayfoam Event of the Year!

Deadline for submissions is Monday, September 19, 2016
The winners of the SPFA National Industry Excellence Awards 2016 were announced at the Sprayfoam 2016 Convention & Expo during the Awards Luncheon on Feb. 10, 2016. See who won!

Start getting your submissions for the 2017 Awards together now. The website will be open for entries soon.
Foam Supplies, Inc.
SPFA Membership
>> Welcome New SPFA Members
>>2015-16 SPFA Membership Directory and Buyers' Guide
>>Interested in Becoming Part of the Team?
>>SPFA Member Benefits
Federal/State Government News
Volume XXIV, No. 28 - September 5, 2016
The State Net Capitol Journal contains timely and pertinent information for almost every business owner in every state.Some features in this issue include:
-- Golden State Cap-And-Trade Program Faces Hazy Future
-- Multi-State Climate Initiatives Cover Much Of Country
U.S. Federal Legislative & Regulatory Activities
> Congress Returns Next Week for a Blistering Session Before the Election
> DOE Issues Rulemaking on Consumer and Commercial Water Heaters
> Error Corrections Addressed in DOE Rulemaking
> Several ASHRAE Standards Referenced in Proposed Rule on Test Procedures for Central Air Conditioners and Heat Pumps
> HUD’s Manufactured Housing Consensus Committee to Hold Public Webinar
GGAC Regional and Chapter Activities
> California Legislature Passes Comprehensive Climate Change Legislation
> California Public Utilities Commission Adopts Revised Energy Efficiency Plan
> Florida Proposes Lower Examination Fees for Asbestos Consultants and Contractors
> Florida Plans Public Hearing on Commercial Energy Building Code
> Plan a Day on the Hill for ASHRAE
SPF Tech
Source: sprayfoamadvisor.com / Robert Naini
This week we are going to move to another part of the building envelope and talk about unvented crawl spaces. This application is often lumped in with attics, most likely because the IRC code section for foam plastics, IRC 316, has the same limitations and requirements for attics and crawl spaces, and these locations are generally not considered occupied or living spaces of the building.
SPFA Training & Certification
The Professional Certification Program is seeking volunteers for the PCP Exam Prep curriculum review. We’ll be meeting shortly to divide assignments and give details on the review process.

If you aren’t able to help out with the curriculum review, but you’ll be attending the Spray Foam 2017 convention in Palm Springs, we could use your help there!

Please contact Kelly Marcavage at kmarcavage@sprayfoam.org for more details.
During Sprayfoam 2017 in Palm Springs, CA, the PCP events will be held during the pre-convention dates.

Here is the preliminary schedule* – check the website at www.sprayfoam.org for more details as we get closer to the event.

Sunday, January 29, 2017 – PCP Exam Prep Courses, Field Exams and Written Exams

SPF Insulation Master Installer Exam Prep Course
SPF Roofing Master Installer Exam Prep Course
SPF Field Examiner Exam Prep Course

Monday, January 30, 2017 – PCP Exam Prep Courses, Field Exams and Written Exams

SPF Insulation Installer Exam Prep Course
SPF Roofing Installer Exam Prep Course
SPF Insulation Project Manager Exam Prep Course
SPF Roofing Project Manager Exam Prep Course

Tuesday, January 31, 2017 - SPFA PCP Written Exams
Wednesday, February 1, 2017 – SPFA PCP Written Eaxams

If you have any questions about these or anything regarding the PCP, please contact Kelly Marcavage at kmarcavage@sprayfoam.org
We are looking at data showing that many folks have successfully completed some of the requirements needed to become SPFA PCP Certified; however, they haven’t submitted all the information needed to earn the distinguished SPFA PCP Certification.

Please let us know what is holding you up.

A Working Group is being formed to reach out to those who have begun, but not yet completed certification levels. We’d like to hear from you on what is stopping you from completing the requirements. This same group will also work on retaining and renewing those who are already certified and helping them get to the next level!

We look forward to hearing from you. Please direct comments, concerns and questions to Kelly Marcavage at kmarcavage@sprayfoam.org
In 2012, OSHA began a program to align the old Hazard Communications Standard (HCS) with the new Globally Harmonized System of Classification and Labeling of Chemicals (GHS). https://www.osha.gov/dsg/hazcom/ This new system to be implemented over the next several years, includes updated methods to communicate hazards on product labels and safety data sheets using an international standard.
Breaking News! 360Training is offering SPFA Members and PCP Participants a 15% discount off select online OSHA training courses. This is a great benefit for SPFA Members and PCP participants! Please contact Kelly Marcavage at kmarcavage@sprayfoam.org to get the unique SPFA discount code. NOTE: this code is in effect for a limited period of time, so take the course soon to receive the discounted fee.

The 10 Hour OSHA course is required for the SPF Installer and Master Installer Certifications.
The 30 Hour OSHA Construction Course is required for the SPF Project Manager Certification.

If you take the 30 hour course, it fulfills SPFA PCP requirements for the 10 hour course.

For more details on all SPFA PCP requirements – visit our website at www.sprayfoam.org/certification
Within the next few weeks, SPFA will be hosting an informational webinar about the SPFA Professional Certification Program (PCP). The program will be moderated by Kurt Riesenberg, Executive Director SPFA and the speakers are Bonnie Strickler – Chair of the QAP Committee for the Certification Program and Kelly Marcavage, Certification Director SPFA.
In our quest to continually improve the SPFA’s Professional Certification Program (PCP) – we’ve put the forms and checklist for each level of certification into a folder for you to easily access from our website. www.sprayfoam.org/certification. These are the same forms that are in each of the handbooks, but we’ve extracted them and made them fillable for you to easily complete. The checklist for each level is also in the folder.
An enhanced listing in SPFA Membership Directory and Buyers' Guide is just one of the perks of Accreditation!
Naylor Association Solutions
See what's in store, as far as industry events, expos, training classes, online courses, certification programs and more.
Business Trends
>> 5 Key Tips on Sales Forecasting for Business Owners
>> 3 Technologies for Streamlining Customer Communications
>> How Choosing And Buying A Franchise Is Like The 10,000 Meter Run



We would appreciate your comments or suggestions.
Your email will be kept private and confidential.