TAPPI Press Features E-Books and New Titles

Paper Machine Wet Press Manual, Fourth Edition
Edited by: Richard A. Reese

Paper Machine Wet Press Manual provides an introduction to wet pressing technology in the paper industry and includes information on practical press section considerations on paper machines. The book provides an overview of press section equipment and key factors in optimizing press section performance. In addition, checklists are included to evaluate press section performance.

The book will be particularly useful to paper company personnel including paper machine superintendents, foremen, paper machine operators, process engineers, etc. Employees of suppliers to the paper industry involved in supplying press section equipment and evaluating press section performance will also find the book beneficial. The Paper Machine Wet Press Manual, Fourth Edition is a project of the Water Removal Committee of TAPPI's Engineering Division.

Item Number: 0102B042 • List Price: $124 • Tappi Member: $83
                  
Starch and Starch Products for Wet End Application
By: Hans W. Maurer

Starch and Starch Products for Wet End Applications is a complement to Maurer's previous book, Starch and Starch Products in Surface Sizing and Paper Coating. His new book, Starch and Starch Products for Wet End Application, addresses issues in the preparation and application of starch and starch products for use in the wet stages of the papermaking process. This publication covers a wide range of subjects in starch utilization, ranging from the preparation of specific starch products to their use in papermaking for flocculation, retention, drainage, strength, and sizing control. Environmental issues in the use of starch and analytical procedures for starch analysis and charge characterization are also addressed.

Item Number: 0101R319 • List Price: $185 • Tappi Member: $125
       
    E-BOOKS COMING SOON
      
Roll and Web Defect Terminology - E-Book
By: Jerome M. Gess and Paul H. Wilson

This book takes the reader through the process of making paper, pointing out where interruptions can occur and where elements that are added to the system can cause problems in that part or subsequent parts of the papermaking process. The aim of this book is to give papermakers and those involved in the papermaking process the information required to allow them to understand how to track down and solve problems at their source rather than where the problems surface.

Paper Machine Quality Control Systems - Volume 1: Measurement Systems and Product Variability - E-Book
By: Quality Control Systems Education Common Interest Group of the Process Control Division

This book describes in detail the measurement technology used in Quality Controls Systems (QCS). Individual chapters are devoted to the five most prevalent QCS measurements (basis weight, moisture, caliper, ash, and color) in the paper industry. Each of these chapters covers the physical principles involved in each measurement, sensor designs, various methods of implementation, and influence factors. A somewhat lighter coverage is given to 10 other QCS measurements that do not have such a broad installation base. Common issues that impact all sensors are explained, including how sensor performance is measured and reported, the impact of scanning processes, filtering, scanner designs and construction, and sensor calibration and correlation. Statistical methods are covered in depth from discrete one-dimensional variability to multi-dimensional variability. Guidance is provided for using these statistical methods to locate the sources of variability in the paper process. This book was written by the Quality Control Systems Education Common Interest Group of the Process Control Division.  
      
    COMING SOON IN PRINT   
      
Production and Applications of Cellulose Nanomaterials
By: Alan W. Rudie, USDA Forest Service, Forest Products Laboratory,
Michael A. Postek, National Institute of Standards and Technology,
Robert J. Moon, USDA Frost Service, Forest Products Laboratory,
Michael A. Bilodeau, University of Maine

Cellulose nanocrystals and cellulose nanofibrils have been known for upwards of 50 years, but recent research suggesting very high strength properties and other unique physical properties have generated extensive interest in these materials. The book will be a collection of summaries on recently completed and on-going research with these high strength materials. This book will highlight cutting-edge research as well as leads on successful applications. Topics will include: production and modification, composites, other applications, modeling, and standards.

TAPPI
http://www.tappi.org/