TAPPI Over The Wire Paper 360
Past Issues | Printer Friendly | TAPPI.org | Advertise | Buyers Guide | Travels with Larry Archive Facebook Twitter LinkedIn
       

Alternatives to Toxic Phenol Compounds in Glues Developed from Softwood Tannins

Print Print this Article | Send to Colleague


About 3 million metric tons of softwood bark are produced as a side-stream of the Finnish forest industry each year. Most of this bark is burned as is, or as a processing energy source in pulp mills. More efficient use of the bark would generate added-value from Finnish forest biomass and create new business.

Water-based extraction processes are presently used to produce tannin from tropical trees such as acacias. Currently tannins are mainly used for dying leather. Tannins are also suitable for glue applications, although, this use is relatively limited. However, they have huge market potential, since phenol-based glue resins have a global market of around 4 million metric tons per year and a value of EUR 10 billion. Phenolic resins are mainly used as binding agents in the production of plywood and laminates.
 
 

The SusBinders project involves the optimization of extraction processes for separating polyphenolic value components from bark. Suitability of the components for various glue applications is also analyzed. Luke (Natural Resources Institute of Finland) is focusing on optimizing the extraction process and increasing the scale of production. Xamk (Southeastern Finland University of Applied Sciences) is developing a continuous extraction process and is preparing and testing wooden panels glued with tannin-based glues. VTT is developing the purification of tannin extracts and is in charge of formulating the glues and resins. VTT is also assessing the technical and economic suitability and carbon footprint of processes and products and coordinating the project.

The project is being funded by Business Finland for Innovation, the research partners and private enterprises from various parts of the value chain. The total budget for the project component is EUR 728,000. The project, which was started in the summer 2017, will be completed on May 31, 2020.

For more information, contact: Senior Scientist Sami Alakurtti, tel. +358 40 351 4964, project coordinator, VTT Technical Research Centre of Finland. More information also is available online.

VTT Technical Research Centre of Finland is the leading research and technology company in the Nordic countries. The center uses its research and knowledge to provide expert services for its domestic and international customers and partners, and for both private and public sectors. VTT uses 4,000,000 hours of brainpower a year to develop new technological solutions. 

 

Back to TAPPI: Over The Wire

Share Share on Facebook Share on Twitter Share on LinkedIn