TAPPI Over The Wire Paper 360
Past Issues | Printer Friendly | TAPPI.org | Advertise | Buyers Guide | Travels with Larry Archive Facebook Twitter LinkedIn
       

Agenda 2020 Paper Machine Drying Project Announced as Part of DOE/National Labs Clean Energy Initiative

Print Print this Article | Send to Colleague


The forest products industry’s Agenda 2020 Technology Alliance is working with Lawrence Berkeley and Lawrence Livermore National Laboratories (California) as part of a new U.S. Department of Energy (DOE) initiative through which the laboratories will develop a model of how water moves through the sheet in the press section. The project is one of several recent initiatives to implement research opportunities identified during the 2014 roadmap effort, with the objective of making breakthrough improvements in industry efficiency and sustainability.

Drying is one of the higher energy-consuming processes in papermaking, so it is an important area for efficiency improvements en route to significant reductions in energy—a key goal of the Agenda 2020 advanced manufacturing program. Understanding how water moves during pressing, how re-wet can occur, and how the paper web is affected are critical insights in the process.

"We are very pleased to have the support of the National Laboratories in this important effort," said Agenda 2020 executive director David Turpin. "We applaud this federal initiative to leverage its high computing capabilities by deploying it for broad use. The project will contribute significantly to our progress."

Agenda 2020 is conducting workshops this fall with support from an Advanced Manufacturing Technology grant from the National Institute of Standards and Technology. For more information, contact David Turpin .

The paper drying project is part of a Clean Energy Manufacturing initiative announced by DOE assistant secretary David Danielson, as described in the Department’s news release below.

The Agenda 2020 Technology Alliance is an industry-led consortium that promotes development of advanced technologies for the pulp and paper industry.


U.S. DOE release on Clean Energy Manufacturing initiative: 

A new DOE initiative will allow industry to leverage the high performance computing (HPC) capabilities of Lawrence Livermore (LLNL), Oak Ridge, and Lawrence Berkeley national laboratories to advance clean energy manufacturing technologies. The new program was announced by David Danielson, assistant secretary for Energy Efficiency and Renewable Energy (EERE), this past Tuesday, at DOE’s third annual American Energy and Manufacturing Competitiveness summit in Washington D.C.

The High Performance Computing for Manufacturing Program (HPC4Mfg) will make $5 million available for qualified industry partners. HPC4Mfg will couple U.S. manufacturers with the national laboratories' world-class computational research and development expertise to address key challenges in U.S. manufacturing.

"With the HPC for Manufacturing program, DOE is taking the lead in recognizing the untapped resources and potential economic impact that the national laboratories represent. HPC4Mfg is designed to lower the cost of entry and to ease the way for U.S. manufacturers to use high performance modeling and simulation for a competitive edge," said LLNL Director Bill Goldstein, who was a panelist at the summit. "Specifically, we’ll have the opportunity to explore challenges in the most energy-intensive products and processes where modeling and simulation are ideally suited to offer solutions."

Under the program, selected projects will apply modeling, simulation, and data analysis to industrial products and processes to lower production costs and shorten the time to market for new clean energy technologies. The goal is to keep the U.S. at the forefront of innovation by accelerating advanced clean energy technology and energy efficiency techniques.

HPC4Mfg adds a new dimension to DOE’s EERE Clean Energy Manufacturing Initiative (CEMI), sponsor of the annual summit along with the Council on Competitiveness. CEMI aims to increase American competitiveness in the production of clean energy products and to boost U.S. manufacturing competitiveness across the board by increasing energy productivity.

Lawrence Livermore will lead the HPC4Mfg program. The $5 million will be used to initially fund eight to 10 projects to be selected through a review committee, with representatives from DOE and the three national labs. Projects also may include nonprofit partners. Initial funding will be for up to one year. These will build on the foundation of five currently approved seedling projects.

Under one such collaboration, LLNL is working with Purdue University Calumet to develop an integrated HPC modeling simulation and visualization capability for steel manufacturing called "The Virtual Blast Furnace."Lawrence Berkeley and LLNL are working with The Agenda 2020 Technology Alliance to develop a high-fidelity model for coupling flow and mechanical deformation of the re-wet of the porous paper web during the manufacturing process, which would improve the drying of paper products.

Other projects include working with: Carbontec Energy Corp. to use HPC to model the E-iron nugget process – a new way of steelmaking using biofuel; SORAA to develop a high quality crystal growth model for the gallium nitride (GaN) reactor (to accelerate development of the reactor); and Gas Technology Institute to use computational modeling to advance combined heat and power system development.

"We will match industry proposals with the expertise and HPC resources resident at the three national labs," said Peg Folta, LLNL director of HPC4Mfg. "Our goal is to accelerate innovation, reduce the time to bring clean energy technologies to market, and introduce efficiencies to energy manufacturing processes.
 

Back to TAPPI: Over The Wire

Share Share on Facebook Share on Twitter Share on LinkedIn