GGIA Newsletter
  Archive | nrmca.org | E-Store | Conferences & Events | Certifications | InFocus
 

NRMCA Revises Process for Certification of Delivery Vehicles

Print Print this Article | Send to Colleague

NRMCA is notifying interested parties of an update to the required forms to complete for certification of delivery vehicles for the NRMCA Plant Certification Program (a link to the revised NRMCA’s Fleet Inspection Reporting Form is below). This form has to be used for initial certification and to re-certify delivery vehicles. NRMCA will not accept submission of older forms. Since the certification of the concrete production facility is valid for a period of two years, the delivery vehicles shall be re-inspected during the certification period of the production facility to maintain its certification status.

The NRMCA program does permit two options – Option A where the inspection is performed by the company and audited by the inspecting engineer and Option B where the delivery vehicles are inspected by the inspecting engineer who performs the plant inspection. Certification expiration for the delivery vehicles is 14 months from the date of inspection to allow for a nominal annual inspection. NRMCA recognizes that the delivery vehicles are an integral part of the production process and cannot issue certification for production facilities without certified vehicles. 

The Check List includes provisions for inspection and certification of truck mixers, agitators and non-agitating units. The delivery fleet inspection requires that not more than one unit or 10 percent of the units, whichever is greater, to be used at the plant fails to meet requirements. A copy of the current Plant Certification Check List (Eleventh Revision) is only provided to inspectors approved to perform inspections for the program. A listing of approved inspectors is available on the NRMCA Web site.
  • Click here for the most current NRMCA Fleet Inspection Reporting Form.
  • The payment form must accompany the NRMCA Fleet Inspection Reporting Form.
  • Also note additional guidance and information for obtaining and maintaining certification for production facilities for the duration of the certification.
For additional information on the NRMCA Plant Certification program contact Karen Bean at kbean@nrmca.org or visit the NRMCA Web site.
 

Share Share on Facebook Share on Twitter Share on LinkedIn

 
Fritz-Pak Corporation
Marcotte Systems Ltd.
WAM Inc.
MPAQ Automation
Command Alkon
Logo NRMCA
900 Spring Street
Silver Spring, MD, 20910
Phone: 301-587-1400 Toll Free: 888-84 NRMCA (846-7622)
Email: info@nrmca.org